Keeper of Measure. Every dimension has a reason.
Edit Autodesk Fusion parameters, formulas, and model variants while keeping your design visible.
Русский · Download · Issues & feedback
Paramood is an add-in for Autodesk Fusion, formerly Fusion 360, that puts a parameter editor, calculator, and browsable parameter list into one Fusion palette. Create and edit user parameters, inspect model dimensions, and work with formulas while your design remains visible. Define several dimensions at once, inspect the preview, and apply changes without navigating the native Parameters dialog for every edit.
The idea is simple: use the precision of parametric CAD with the speed of an IDE. Paramood is an interface over real Fusion parameters, not a separate parameter storage system.
Before editing: Paramood changes to configured parameters update the active variant automatically; parameters outside the configured set remain global. Choose Free to leave saved variants unchanged. Applied values are kept even if a downstream Fusion feature fails; inspect geometry and the timeline before saving or sharing a configuration.
Warning
Upgrading from 1.x: Paramood 2.0 uses separate variants.v2 storage. Existing variants.v1 records are preserved in the model, but 2.0 does not read or migrate them. Old variants will not appear in the variant table; recreate them in the new table to use them in 2.0.
The default Hybrid view keeps the parameter list visible and the shared input fixed at the bottom. Results, recent calculations, and assignment previews open in a dismissible panel above the input. Calculator and Parameter list remain available as separate views; switching views preserves your input.
The header shows the current design, its length units, and the active variant. Synchronization with Fusion is automatic.
The Hybrid palette keeps the parameter tree and expression input together. IntelliSense suggests model parameters as you type, while the calculator evaluates expressions using their current values:
In a wide palette, the calculator view places the input and result next to the parameter tree:
Enter several assignments to review their current and proposed values before applying them. This preview proposes changes to the Compact variant; no values have been applied:
Switch saved variants from the header, or open the table to compare and edit configured parameter expressions and supported feature states. Compact has a tray width of 120 mm; scroll horizontally to reach further columns:
The Compact configuration of the Cedar & Sage example model:
Screenshots show Paramood 2.0 running in Fusion on macOS.
Download the latest Paramood release from GitHub Releases.
| Area | Capability |
|---|---|
| Quick input | One field for calculations and parameter assignments. Expressions without = are evaluated; assignments open a preview and require an explicit Apply parameters action. |
| Batch parameters | Create and update parameters from semicolon-separated definitions, preserving formula references. |
| IntelliSense | CodeMirror completion for parameters, virtual paths, all 26 Fusion functions and four constants; nested Signature Help, active arguments, and conservative diagnostics. Expression reference. |
| Parameter browser | A searchable, collapsible tree of named and model parameters; search names, paths, expressions and comments while preserving editor focus and prior scroll. |
| Inline editing | Click a value to edit with IntelliSense. Press Enter to validate and apply or Escape to cancel. |
| Naming and dependencies | Click an editable parameter name to rename it, or drag the name into an existing virtual group. Rename or drag a group to move its full subtree. A model value such as 20 (d_min) shows its expression; driven sketch dimensions are displayed in parentheses and are read-only. |
| Find References | Magnifying-glass search for direct and indirect parameter uses, drill-down through dependent parameters, and timeline selection. Dashed names mark verified unused user parameters. |
| Create while editing | Enter a new name, name=25, or a supported equation such as -name/5=50 in an editable value to create and link a new parameter. |
| Parameter removal | Delete individual parameters from the list when Fusion permits it; failed or unsupported deletions return an error. |
| Model awareness | Refresh on document changes; show indicators for known sketch, feature, or other parameter links. |
| Native expressions | Physical and compound units, lazy conditionals, native unit aliases, and random() in Preview/Apply. Sampled previews are marked ≈. |
| Calculator | Evaluate expressions against the current design, see formatted results, reuse recent calculations, and copy results or expressions. |
| Saved variants | A model-wide table of parameter expressions and supported feature states, stored in the design. Switch variants from the header. |
| Text parameters | Quoted text, references, concatenation, and supported conditional expressions; the list shows the computed text while editing preserves the formula. |
| Model units | Select mm, cm, m, in, or ft beside the design name without changing physical sizes. |
Type the following in the Paramood field:
box.inner.size = 25mm; box.width = box.inner.size * 2
Paramood presents the definitions for review. After you apply them, the actual Fusion parameter names are box_inner_size and box_width; the dotted syntax is a readable virtual view of those names. Fusion continues to store and evaluate ordinary parameter expressions.
The virtual hierarchy is also used for completion:
| Fusion parameter | Paramood editor |
|---|---|
box_size |
box.size |
box_wall_thickness |
box.wall.thickness |
box_width |
box.width |
Typing b prioritizes box. Typing box. narrows the suggestions to its members. Original underscore-separated names remain usable.
Other supported workflows include:
2 + 3 # calculate, without changing the model
width = 15mm # preview then create/update
width += 2mm # modify an existing expression
height = width / 2 # retain the parameter dependency
These are separate examples: enter the expression or definition without the explanatory comments.
Click an editable value in the parameter tree. The inline editor supports the same parameter completion and virtual dotted names as the main editor.
| Input | Result |
|---|---|
height |
If height exists, link to it. If it is new, create it from the edited parameter's current value and link to it. |
height=25 |
Create height with value 25 and link to it. A bare number uses the edited parameter's unit. |
-height/5=50 |
Create height=-250 and set the edited expression to -height/5, yielding 50 in its unit. |
Creation and linking are validated together. Equation solving supports one new name multiplied or divided by numbers or existing dimensionless parameters; other forms are rejected. When a Fusion command or sketch edit prevents a transaction, finish it before creating and linking a parameter. Existing names are never overwritten by a new definition.
- Open the variant menu and choose Create variant or the shared Edit variants button in the menu header.
- Use Configure to choose the model-wide set of parameters and timeline features.
- Variants are always rows; parameters and features are always columns. Click a value to edit that variant's expression. A checked feature is Enabled; unchecked is Suppressed. Drag handles reorder parameters and variants. Mouse gestures and saved-order round-trip were checked in Fusion on macOS.
- Save stores the complete table and applies the edited active variant. Other variants are saved without switching. Cancel lets you discard the draft without changing the model.
Controlled parameters have a small table icon in the common list. Parameters outside the set remain global and are never enrolled automatically. Free keeps the current geometry and lets parameter edits leave saved variants unchanged. The switcher keeps its existing interaction.
Format 2 is stored separately in the model: old 1.x variants are preserved but are not read or migrated. Recreate them in the new table to use them in 2.0. The original Cedar & Sage 1.x example retains the old format; use the separate 2.0 example or recreate its variants. See Variants 2.0 for workflow, verification and limitations.
Enter a quoted value without selecting a type:
caption = 'Body'
Double quotes are accepted too: caption="Body". Paramood converts them to Fusion's single-quoted syntax. References and formulas remain editable:
label = caption + ' / ' + 'Compact'
A supported conditional expression is label=if(width<20 mm; 'Short'; 'Long'), where width is an existing length parameter. Semicolons and equals signs inside quoted text are content. Existing numeric parameters cannot be converted to text, or text parameters to numbers. See the user guide for escapes, units, variants, and limitations.
- Download the latest Paramood ZIP from Releases, then extract it.
- In Autodesk Fusion, open Utilities → Scripts and Add-Ins → Add-Ins.
- Click +, select the extracted
Paramoodfolder, then select Paramood and click Run. - Enable Run on Startup. Paramood opens as a dockable palette; use the Paramood toolbar command to reopen it.
The packaged add-in includes the compiled frontend. Node.js is not required for installation.
- Platforms: Windows and macOS are declared in the manifest. Automated checks run on both (and Linux); interactive Fusion testing has been performed on macOS, while native Windows validation remains outstanding.
- Scope: the active Fusion design. User parameters and editable model parameters are supported where Fusion allows changes; parameters in externally linked components are not edited.
- Safety: assignment previews are validated again against the current document before applying. Original numeric formulas are checked and evaluated by Fusion; stale previews are rejected. Random-dependent preview values are marked as samples, while Apply preserves the original formula. Fusion may still report downstream feature errors after a legitimate parameter change. Timeline errors and warnings do not cause Paramood to roll back an applied value or variant; inspect the geometry after switching.
- Deletion: individual deletion follows Fusion restrictions. The broom beside tree search opens an unused-user-parameter preview. Uncheck anything to keep; its dependencies are kept too. Favorites, geometry and saved variants are protected. Delete selected requires confirmation and a fresh model snapshot; the complete operation is one undoable Fusion transaction. Unknown dependency coverage blocks cleanup.
- Known limitations: Native expression evaluation supports the documented Fusion functions, physical and compound units, and random formulas. Virtual dotted names do not create objects inside Fusion; they are a convenience in Paramood.
Yes. Paramood lists user parameters and model parameters and lets you edit values where Fusion permits it. Driven sketch dimensions are shown in parentheses and cannot be edited from the palette.
Yes. Enter an expression such as height=width/2 to retain a dependency on width. The editor offers parameter completion, and the preview checks assignments before they are applied.
The package declares support for both platforms, and automated checks run on both. Interactive testing inside Fusion has been performed on macOS; native Windows validation remains outstanding.
- User guide: input, units, variants, text, and boundaries.
- Cedar & Sage 2.0 walkthrough: a feeder model and variant examples.
- Published releases: downloads and release notes.
- Product concept and IntelliSense details.
Development uses Node.js 22.12+ and Python; the CI Python environment is 3.14.
cd frontend
npm ci
npm run lint
npm run format:check
npm test
npm run build
cd ..
python -m pip install pytest ruff==0.17.3
python -m ruff check Paramood scripts tests
python -m ruff format --check Paramood scripts tests
npm test
python -m pytest -q
python scripts/build_release.pyThe release builder creates dist/Paramood-<version>.zip and a matching .sha256 file. GitVersion computes release versions from tags and Conventional Commit messages. After successful CI checks, pushes to main can publish when shipped runtime changes are eligible. A documentation-only push can also retry an earlier missed runtime release; documentation alone does not create a release.
Tech stack: Fusion Python API · Preact · TypeScript · CodeMirror 6 · Vite · Vitest · Pytest.
Perfora · Selectra · Ejix · RuEn · Planara
Paramood is an independent 4FusionLab project and is not affiliated with Autodesk.
Paramood is available under the PolyForm Noncommercial License 1.0.0. Commercial use outside its permitted purposes requires a separate agreement with 4FusionLab. Third-party components remain subject to their own licenses.





