telink

Telink fork of CSA's open-source Matter implementation (project-chip/connectedhomeip), with vendor support for Telink Matter SoCs. Telink develop and release branches are maintained in this fork.

Zephyr RTOS fork with Telink board support packages for TLSR9 series SoCs (BLE / Zigbee / Thread / Matter). Maintained by Telink Semiconductor.

L1 R1: Telink 48MHz BLE SoC (TLSR8258/TLSR8253/TLSR8251)

Collection of tools and code for reprogramming Tuya BLE smart lights (TYBT1) boards based on the TLSR8266 MCU with new Rust firmware.

Open ZMK firmware + reverse engineering for the Wobkey Rainy 75 Pro (Telink TLSR9511 / B91, RISC-V)

Home Assistant HACS integration for local control of Tuya BLE Mesh devices (Malmbergs BT Smart). Supports SIG Mesh and Telink proprietary mesh via WiFi/BLE bridge daemon.

Local control of Cync / C by GE smart lighting in Home Assistant - no cloud, no internet required

Fleet management for PVVX Telink thermometers (LYWSD03MMC, MHO-C401, CGG1) in Home Assistant: read and write every setting over Bluetooth proxies, snapshot, restore, clone and compare

L2 R2：Telink 96MHz RISC-V BLE/Matter SoC (TLSR9218/TLSR9215/TLSR9213)

A fork of https://git.martb.dev/MartB/glc002-firmware . Replacement firmware source for the GL-C-002P from Gledopto, based on the official Telink SDK sample.

Watermeter Bluetooth BLE TLSR8253

Local-first control for AwoX/EGLO BLE-mesh lamps: REST API, passive live status, scenes, and an MQTT/Home-Assistant bridge to Matter (SmartThings/Apple/Google/Alexa). .NET, Raspberry Pi & Windows.

BLE Advertisement controller for freetz (FRITZ!Box)

OPPLE BLE2 / Telink Bluetooth-Mesh-Lampen per ESP32 in Home Assistant – DIY-Ersatz für die OPPLE Smart Connect Box

A gateway for controlling Telink Mesh lights from Home Assistant using MQTT.

Native macOS controller for compatible AwoX and legacy Telink private-mesh lights, with MQTT/Home Assistant integration.

ESPHome component for controlling Smart LEDZ lights.

Control a Xiaomi Mi Computer Monitor Light Bar (MJGJD01YL) from your PC over USB, using a cheap RF-NANO (Arduino Nano + nRF24L01) as a 2.4 GHz radio bridge — no Raspberry Pi and no original remote needed.

Demo firmware to display Green Power Device functionality

Flash programmer for Telink TC32 BLE SoCs (TLSR8266/8258 family) via SWS on FTx232x