This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in XMC7000 MCU. This example contains how to use the IPC low level I/F. The low level I/F directly controls the IPC.

This is a minimal starter multi-core application template for XMC7000 devices.

This code example demonstrates the implementation of a UDP client with XMC7000.

This code example demonstrates implementing a secure TCP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates the TCP Keepalive Offload functionality offered by Cypress Wi-Fi devices using PSoC® 6 MCU. It employs the AnyCloud Low Power Assistant (LPA) middleware library which helps in developing low power wireless applications for the Cypress devices.

This code example demonstrates how to use controller area network flexible data-rate (CAN FD) in XMC7000 MCU devices.

This code example demonstrates generating a One-Time Password (OTP) using the True Random Number generation (TRNG) feature of PSoC 6 MCU cryptography block.

This example demonstrates interfacing with an external NOR flash memory in Quad-SPI mode using the Serial Memory Interface (SMIF) block in PSoC 6 MCU.

This code example demonstrates the use of the Flash HAL driver to perform code flash Read/Write/Erase basic operate and update sector data online.

This code example demonstrates how to enter the DeepSleep and Hibernate mode, and wakeup using the RTC alarm.

This code example demonstrates how to use the tcpwm counter on the XMC7000 MCU.

This example is the out-of-the-box (OOB) demo project for the KIT_XMC72_EVK XMC7200 evaluation kit.

This example uses the smart I/O peripheral in XMC7000 MCU to connect the button input pin to an output pin to toggle an external LED.

This code example demonstrates how to use the SysTick timer to generate a timer interrupt on xmc7000 MCU.

This code example demonstrates the blinking LED functionality implemented by FreeRTOS tasks on the XMC7000 MCU devices.

This code example shows how to configure low-voltage detection (LVD) in XMC7000 MCU to monitor VDDD and generate an interrupt when VDDD drops below the configured threshold.

This code example demonstrates the implementation of a secure TCP client with XMC7000.

This code example demonstrates how to use the XMC7000 MCU event generator (EVTGEN) resource to trigger ADC conversion in active power mode.