5GNetwork_in_Manufacturing

Source Data: 5G Network Slicing in Quality Control Process of Manufacturing

Purpose

Simulate QOS Control process data transmission over 5G on kubernetes platform

How To Setup The Testing Environment

To use this repository you need to have access into a running kubernetes cluster and proceed with the following steps

Deploy OAI 5G Core

1. Deploy Core Network

cd helm-charts/oai-5g-core-basic
helm dependency update
helm install oai-5g-basic .

Deploy OAI RAN: Sepparate CU & DU (F1 Mode)

1. Deploy CU

cd helm-charts/oai-5g-ran/oai-du
helm install oai-du .

2. CU Config Values

config:
  timeZone: "Europe/Paris"
  useAdditionalOptions: "--sa --log_config.global_log_options level,nocolor,time"
  # If mounting the configuration file then below parameters are not used
  cuName: "oai-cu"
  mcc: "001"   # check the information with AMF, SMF, UPF
  mnc: "01"    # check the information with AMF, SMF, UPF
  tac: "1"     # check the information with AMF
  sst: "1"     
  amfhost: "oai-amf"  # amf ip-address or service-name oai-amf-svc or 172.21.6.94
  n2IfName: "eth0"    # if multus.n2Interface.create is true then use n2
  n3IfName: "eth0"   #if multus.n3Interface.create is true then use n3 or you can only use 1 interface n2 or eth0 
  f1IfName: "eth0"   #if multus.f1Interface.create is true then use multus.f1Interface.Ipadd
  f1cuPort: "2153"   #2153 if using same interface for f1 and n3 else standard port 2152 should be use if f1 and n3 interface are different

2. Deploy DU

cd helm-charts/oai-5g-ran/oai-du
helm install oai-du .

3. DU Config Values

config:
  timeZone: "Europe/Paris"
  useAdditionalOptions: "--sa --rfsim --log_config.global_log_options level,nocolor,time"
  duName: "oai-du-rfsim"
  mcc: "001"   # check the information with AMF, SMF, UPF
  mnc: "01"    # check the information with AMF, SMF, UPF
  tac: "1"     # check the information with AMF
  sst: "1"  #currently only 4 standard values are allowed 1,2,3,4
  usrp: rfsim   #allowed values rfsim, b2xx, n3xx or x3xx
  f1IfName: "eth0"   #if multus.f1Interface.create is true then use f1
  cuHost: "oai-cu" ## Ip-address or hostname
  f1cuPort: "2153"   #2153 if using same interface for f1 and n3 else standard port 2152 should be use if f1 and n3 interface are different
  f1duPort: "2153"   #2153 if using same interface for f1 and n3 else standard port 2152 should be use if f1 and n3 interface are different

Deploy OAI nr-UE

1. Deploy OAI nr-UE

cd helm-charts/oai-5g-ran/oai-nr-ue
helm install oai-ne-ue .

2. Default Params

...
config:
  timeZone: "Europe/Paris"
  rfSimServer: "oai-ran"    # ip-address of rfsim or service name oai-gnb or oai-du
  fullImsi: "001010000000100"       # make sure all the below entries are present in the subscriber database
  fullKey: "fec86ba6eb707ed08905757b1bb44b8f"
  opc: "C42449363BBAD02B66D16BC975D77CC1"
  dnn: "oai"
  sst: "1"                     # configure according to gnb and amf, smf and upf 
  sd: "16777215"
  usrp: "rfsim"            # allowed rfsim, b2xx, n3xx, x3xx
  useAdditionalOptions: "--sa --rfsim -r 106 --numerology 1 -C 3619200000 --log_config.global_log_options level,nocolor,time"
...