Repository navigation
1.1 release - #173
Merged
Merged
1.1 release#173
Conversation
A title or deck that ends in a widow is broken again over the same number of lines, as full as they can be: a DP charges every line but the last its squared room left on the block, and the last must reach a third of it. Replaces evening the last two lines, which left one full line over two half lines. Playground page #/playground/title-wrap compares the rules.
The report no longer repeats the spec (chart type, theme, encodings, interactions, "User interactions: none."). Each chart lists its errors, warnings and update ops that will not apply; a finding several charts share is listed once; the layout takes one line. Link notes on linked charts sit apart and do not count as something to fix; the shared colour order note is gone. A clean spec reads "Nothing to fix: call show with this spec." validate_chart returns the text report alone for vegalite, so each warning appears once. The skills describe the new report.
…re, and a source says its lead-in once
FlintTable keeps the title, subtitle and notes in place and scrolls the
rows under sticky column headings. A chart's table carries the plan's
header pieces, closing rules and source line, and FlintTable draws them,
so a table under the Economist or BBC theme gets its tab, rules, source
and house credit. A source that already starts with the theme's lead-in
("Source: Gapminder") prints it once. The card's table PNG draws the
rules, the tab and the source line.
ChartView locks overflow on html and body for its own iframe; the site embeds it in the page itself, so the playground gallery could not scroll. Call useHostPage above the card in the three embeds that lacked it.
The canvas-fit pass judged a chart by how far the host would scale it, and left one that read well drawn up to ~30% larger than its box: keys beside a plot that filled the width, a title over one that filled the height. Hosts that draw the SVG at its own size (Data Formulator) cut them off. After the fit, planLayout now runs containInCanvas: where an explicit canvasSize is given and the measured drawing runs past it, the chart is laid out again for a smaller room (CanvasTreatment.contain) - the fit's edits kept, keys held at their edge - found by a few rounds of bisection per side. A round is kept only if the plot keeps >= 50% of each side, no more values are cut by overflow truncation and no label is turned that stood flat; a result that is nearer but not within must gain at least min(3 points, half the gap) of scale. Reported as 'canvas-contain'; skipped for canvasFit 'off', composites, pinned sessions replays (replayed via the treatment), and unmeasured furniture. The drawing estimate used by this step also counts a deck printed without a headline (furniture-reserve deckAlone), a row of keys from its anchor along the plot, the half of a top y label that stands above the plot, and leaves out series-end names that are drawn inside the plot. These are scoped to the new step: charts without canvasSize lay out byte-identically (5441 corpus cases). Tests: canvas-contain.test.ts renders the issue's charts (stacked, line, donut, bar) under none / keys-on-top / nyt / datawrapper at 600x300, 290x300, 290x240 and asserts the SVG stays within the box. row-names-above: the note now names the room laid out for. live-values: the pushed-vs-fresh comparison tolerates <=1px at the root frame only - a pre-existing Vega incremental-layout quirk (8/76 transitions at baseline) that the new sizes happen to hit. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> Copilot-Session: dcd3da51-67ac-4e66-b402-bfab78750c39
…ouse Data Formulator hit "Cannot destructure property 'aggregate' of 'fieldDefToSortBy'" in flint-chart 1.0.1: datawrapper sets row names above the bars only in narrow, tall boxes (240x420, 320x420 for 14 long names), and the channel sort "-x" on that layer, which has no x, threw inside Vega-Lite. The fix is already on dev (bandOrder / alignBandOrders, ff18201 + aad6b2d); the existing test covered one size. The new grid compiles 5 sorted-bar variants (sortBy x desc/asc, columns sorted by y, field sort, stacked) at 6 widths x 4 heights under no theme and every THEME_PRESETS house with vega-lite compile, asserting no throw and no dropped sort ("conflicting sort properties"), and checks the grid reaches the row-names-above layer at 240x420 and 320x420. It fails under 16 houses with alignBandOrders disabled. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> Copilot-Session: dcd3da51-67ac-4e66-b402-bfab78750c39
filterControls swaps the rows a filter leaves into the compiled inline source through prepareDataRows, which only converted temporal values. The compiled data of a chart with an aggregate encoding (or several y fields) holds rows Flint folded and aggregated at build time, so the raw rows had no price_average-style column and the chart emptied. prepareDataRows now uses the session's shapeRows, the same analysis step that built the data and that replan already uses for filtered rows. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> Copilot-Session: dcd3da51-67ac-4e66-b402-bfab78750c39
…#172) 999,600 printed as 1000k (or 1,000k under one unit per set) because the unit was chosen from the unrounded magnitude. The unit now moves up where the value rounds to 1000 at the precision it prints with, in the JS formatter, the Vega expression, the shared-unit path, the KPI tile and the label-width estimate. Fixes #172 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* [deploy] fix plotly issue and mcp (#152) * local * updates * fixes * perf(js): lazily discover fields for encoding sort repair --------- Co-authored-by: xavier <75410443+xavier-shaw@users.noreply.github.com> Co-authored-by: Chenglong Wang <chenglong.wang@microsoft.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* [deploy] fix plotly issue and mcp (#152) * local * updates * fixes * Reduce temporal conversion column allocations --------- Co-authored-by: xavier <75410443+xavier-shaw@users.noreply.github.com> Co-authored-by: Chenglong Wang <chenglong.wang@microsoft.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* [deploy] fix plotly issue and mcp (#152) * local * updates * fixes * Avoid preliminary full Python semantics pass * Preserve Python type pass benchmark evidence --------- Co-authored-by: xavier <75410443+xavier-shaw@users.noreply.github.com> Co-authored-by: Chenglong Wang <chenglong.wang@microsoft.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* [deploy] fix plotly issue and mcp (#152) * local * updates * fixes * Add reproducible compiler and render baselines * Bound render benchmark workers and guarantee cleanup * Record bounded local render baseline --------- Co-authored-by: xavier <75410443+xavier-shaw@users.noreply.github.com> Co-authored-by: Chenglong Wang <chenglong.wang@microsoft.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* [deploy] fix plotly issue and mcp (#152) * local * updates * fixes * perf: index explicit overflow order membership Replace per-entry linear membership scans in the default overflow explicit-value order (JS defaultOverflowOrder, Python _default_overflow_strategy) with an invocation-local Set. JS Set.has uses the same SameValueZero equality as Array.includes. Python set membership matches list membership for the hashable unique values (incl. True == 1); unhashable JSON entries fall back to list membership so they are still skipped rather than raising. Adds scripts/bench-overflow-order (harness + recorded 3-round results). Refs #161 --------- Co-authored-by: xavier <75410443+xavier-shaw@users.noreply.github.com> Co-authored-by: Chenglong Wang <chenglong.wang@microsoft.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Flint 1.1: Layouts and Maps
Maps
chartProperties.boundaries): a named set, or a file of your own.fit), in a projection centred on it.projection: "orthographic"turns to face the data and hides the far side; drag to turn it.classestakesequal,jenksorcontinuous.mapStylenames a ground (atlas,dark,muted, …) or restates its colours ({ sea, land, coast, border }).level: "auto"draws states, then counties as you zoom in.orderjoins points into routes, each leg bowed with an arrowhead whose tip sits on its stop;strokeWidthsets each leg's width. A route draws a dot at its start; every stop takes a dot wheresize,shape,textor a quantity'scolorasks for one, laid beneath the lines.textnames a map's points beside them and a choropleth's regions at their middles. A crowded map names its most salient points first (the largest, or the ends of the colour scale), leaving the rest to their tooltips.Layout
canvasSizeis drawn within it: the house's chrome, the headline, keys and labels are measured first, and the plot takes the room left.detailreads as one bar: no seams between its segments, and its label shows the bar's total.Annotations
annotate-text) is a caption beside what it names, with a leader only where it stands off. The bordered card is gone; draw a callout box withset-overlay.updates(notes, overlays, emphasis, viewport), so a copied spec keeps them.set-annotationis deprecated: writeannotate-text.MCP
list_chart_typeswithchartTypereturns that type in full: what it is for, its guidance, itschartPropertiesand interaction presets.get_flint_skillservesapp(flint-app-author) for code that usesflint-chartin an app, a notebook or a script.colorsbinds colours to values per field, so a value keeps one colour on every chart and across turns.showlists what must be fixed before a chart draws apart from what it draws with.Performance
Faster compiles on large data, from Shayne Boyer (Shayne Boyer (@spboyer), #160). Each change keeps its output identical and ships with the script that measured it.
npm run benchmark:renderrecords cold and warm compile and MCP render times and memory per backend, so later changes can be compared against a baseline (perf: add reproducible compiler and MCP render baselines #171).Fixes
Reading data
"2005-05-01T00:00:00.000","…Z","2005-05-01 00:00:00", as a databaseDATEcolumn often serialises) are read as dates underYear,YearMonth,Dateand the other calendar types. A midnight timestamp becomes its date, so the axis prints short labels (Jun · Jul · Aug) instead of full timestamps. Marks sit on their date in every time zone (a Pacific machine used to draw them 7 hours late), and a time of day without a zone is labelled at the hour it says.Percentagefield holding 0.164 prints16.4%, not0.164, without needing anintrinsicDomain.Numberis not added up. A field typedNumberhas unknown additivity, so it is no longer summed or stacked by default: a bar's label or share takes the encoding'saggregate, else the mean. Type totals asCount,Amount,QuantityorProfit; an untyped numeric field still sums.Mis millions, not metres.percentScaleannotation ("fraction"or"percent") settles how a percentage is stored instead of guessing from the values. Before, a growth rate stored as 2.4 (for 240%) printed as "2.4%", and the same column could be formatted two ways depending on which rows a query returned. Axes, tooltips, domains and KPI cards all follow it (Percentage representation is guessed from the data even when intrinsicDomain is set #154).Layout and sizing
canvasSize. A Vega-Lite chart that read well only when drawn larger than its box (a key beside a full-width plot, a title over a full-height one) used to overflow and get cut off by hosts that draw the SVG at its own size. It is now laid out again for the smaller room: the plot gives up space so keys, labels and title fit. The plot keeps at least half of each side, and no value is cut or label turned to make room.canvasFit: 'off'keeps the old drawing.sortBy: "x", the NYT, Economist, Power BI, Pop and De Stijl houses drew bars in name order, because their value labels and row names sit on the same band and Vega-Lite drops a sort the layers don't share. Datawrapper's names-above-bars layout failed to compile in 1.0.1. Every layer now states the same order.options.backgroundand thebackgroundtaken by the React view, the interactive renderer andrenderSvgnow reach the chart, where Vega-Lite's default white used to win. A theme with its own canvas keeps it.Keys and labels
1M, not1000k(Compact number labels print "1000k" and "1000M" when a value rounds up to the next unit #172).−53,901,43,635); it now prints round values.Heatmaps
Date, __cell_x_end.Interactions and updates
filterControlson a chart with anaggregateencoding (average, count, sum) or several y fields used to empty the plot, because filtered rows were swapped in raw. They are now shaped the way the chart's own rows were._<field>_sort_index.validateChartaccepted were silently dropped when drawn: a numeric key on a field drawn as categories ({ Year: 2016 }on a banded year), a single-row series on a line chart (now drawn as a point a note can point at), a region caption asked to sit where it doesn't fit (now placed where it fits), and overlays withstrokeDash: 'dash'or'dot'. An overlay the renderer can't read no longer stops the chart's other updates.cartoon,pop) drew a second, full-size set beneath them.sort: null) kept the static chart's order but turned alphabetical when drawn live, recolouring every series; a faint ink's darker edge also landed on the wrong series.Annotations
pop).Themes
extendsa house and recolours its text or page takes the house's typography with it, and colours that would no longer read on the new page are adjusted. A dark page extendingnytno longer sets its title in near-black.Installing
npm install flint-chartis the whole install (flint-chart/react fails to build without every optional backend installed (dynamic imports of chart.js / plotly.js-dist-min) #155). An app no longer fails to build for want of a backend it doesn't use:flint-chartnow depends on every backend it draws with. For single-file bundles, newflint-chart/react/<backend>andflint-chart/interactive/<backend>entries carry just one library.