Moogo Smart Mosquito Misting Device

A Home Assistant custom integration for Moogo smart mosquito misting devices, providing device control, monitoring, and automation for automated mosquito management in outdoor spaces.

What It Does

This integration connects Home Assistant to Moogo cloud-connected mosquito misting devices via the Moogo REST API (https://api.moogo.com/). It supports both authenticated (full device control) and unauthenticated (public data) modes. Entities update every 30 seconds for authenticated device data and every hour for public data.

Features

• Start/stop mosquito misting operations via switch entities
• Real-time device status: online/offline, concentrate level, water level
• Environmental sensors: temperature (°C), humidity (%), WiFi signal strength (dBm)
• Active schedule count and last misting timestamp per device
• Public data access: available concentrate types and recommended schedule templates
• Config flow supporting both full-access (email/password) and public-data-only modes
• 24-hour rate-limit detection and management for failed login attempts
• Automatic token refresh and session persistence

Prerequisites

• Home Assistant 2023.1.0 or newer
• HACS installed (recommended for installation)
• A Moogo account (optional — required only for device control and per-device sensors)
• Active internet connection (cloud-polling integration)

Installation

See INSTALL.md for the complete guide.

Quick version (HACS): add this repository as a custom repository in HACS, install Moogo Smart Mosquito Misting Device, restart Home Assistant, then add the integration from Settings → Devices & Services.

Configuration

The integration supports two modes:

Full Access (Recommended) — provide your Moogo email and password:

• All device sensors (status, levels, temperature, humidity, signal strength)
• Misting control switch per device
• Real-time updates every 30 seconds

Public Data Only — leave credentials blank:

• Concentrate types and recommended schedule templates
• API connectivity status sensor
• Updates every hour

Configuration Steps

1. Go to Settings → Devices & Services
2. Click Add Integration and search for Moogo Smart Mosquito Misting Device
3. Enter your Moogo email and password for full access, or leave blank for public data only
4. Click Submit

Supported Equipment

Any Moogo smart mosquito misting device registered to your account. Entities are created per device.

Sensors

Entity	Description	Mode
API Status	Integration connectivity	Public
Concentrate Types	Available concentrate types with details	Public
Schedule Templates	Recommended misting schedule templates	Public
Device Status	Online/offline	Authenticated
Concentrate Level	Mosquito control solution status ("OK" / "Empty")	Authenticated
Water Level	Water tank status ("OK" / "Empty")	Authenticated
Temperature	Environmental temperature (°C)	Authenticated
Humidity	Environmental humidity (%)	Authenticated
Signal Strength	WiFi signal strength (dBm)	Authenticated
Active Schedules	Count of enabled misting schedules	Authenticated
Last Misting	Timestamp and duration of most recent operation	Authenticated

Switches

Entity	Description
Mosquito Misting Control	Start/stop misting for each device

Automation Examples

Low concentrate alert:

automation:
  - alias: "Moogo Low Concentrate Alert"
    trigger:
      - platform: state
        entity_id: sensor.moogo_s1_yitg_liquid_level
        to: "Empty"
    action:
      - service: notify.mobile_app
        data:
          title: "Moogo Mosquito Control Alert"
          message: "Mosquito control concentrate is empty - please refill"

Evening misting when device is online and supplies are adequate:

automation:
  - alias: "Evening Mosquito Misting Schedule"
    trigger:
      platform: time
      at: "19:00:00"
    condition:
      - condition: state
        entity_id: sensor.moogo_s1_yitg_status
        state: "Online"
      - condition: state
        entity_id: sensor.moogo_s1_yitg_liquid_level
        state: "OK"
      - condition: state
        entity_id: sensor.moogo_s1_yitg_water_level
        state: "OK"
    action:
      - service: switch.turn_on
        target:
          entity_id: switch.moogo_s1_yitg_spray

Temperature-triggered misting during peak mosquito hours:

automation:
  - alias: "Hot Weather Mosquito Misting"
    trigger:
      - platform: numeric_state
        entity_id: sensor.moogo_s1_yitg_temperature
        above: 25
    condition:
      - condition: state
        entity_id: sensor.moogo_s1_yitg_status
        state: "Online"
      - condition: time
        after: "18:00:00"
        before: "22:00:00"
    action:
      - service: switch.turn_on
        target:
          entity_id: switch.moogo_s1_yitg_spray

Lovelace card:

type: entities
title: Moogo Mosquito Misting System
entities:
  - entity: sensor.moogo_s1_yitg_status
    name: Device Status
  - entity: sensor.moogo_s1_yitg_liquid_level
    name: Concentrate Level
  - entity: sensor.moogo_s1_yitg_water_level
    name: Water Level
  - entity: sensor.moogo_s1_yitg_temperature
    name: Temperature
  - entity: sensor.moogo_s1_yitg_humidity
    name: Humidity
  - entity: sensor.moogo_s1_yitg_signal_strength
    name: Signal Strength
  - entity: sensor.moogo_s1_yitg_active_schedules
    name: Active Misting Schedules
  - entity: sensor.moogo_s1_yitg_last_spray
    name: Last Misting
  - entity: switch.moogo_s1_yitg_spray
    name: Mosquito Misting Control

Troubleshooting

Integration not appearing

• Ensure files are in config/custom_components/moogo/
• Restart Home Assistant completely
• Check Home Assistant logs for error messages

Authentication failures

• Verify your Moogo account credentials
• Ensure your account has device access
• Rate limiting applies a 24-hour lockout after multiple failed attempts; try public data mode to verify connectivity
• Check for 10104 (invalid credentials) or 10000 (rate-limited) in logs

No device data

• Confirm your devices are online in the Moogo mobile app
• Check that your account has the necessary permissions
• Review integration logs for API errors

Sensors not updating or showing "Unknown"

• Check your internet connection
• Device may be offline — check the device status sensor
• Review coordinator update intervals in logs; add debug logging (see below)

Debug logging:

logger:
  default: info
  logs:
    custom_components.moogo: debug
    custom_components.moogo.coordinator: debug

Development

This integration is built on the pymoogo Python library. See docs/DEVELOPMENT.md to set up a development environment.

Support

• Issues: https://github.com/joyfulhouse/moogo/issues
• Discussions / questions: open an issue with the question label.

Support Development

If this project is useful to you, please consider supporting its development:

• GitHub Sponsors
• Ko-fi

License

This project is licensed under the MIT License — see LICENSE for details.

Credits

Built and maintained by JoyfulHouse with the pymoogo library.

This is an unofficial integration and is not affiliated with or endorsed by Moogo.