n8n-nodes-bambulab

This is an n8n community node package for controlling and monitoring Bambu Lab printers over the local network.

Bambu Lab is a 3D printer platform. This package communicates with the printer directly via local MQTT (no Bambu Cloud required).

Installation Operations Credentials Compatibility Usage Resources

Installation

Follow the n8n community nodes installation guide and search for @hanna84/n8n-nodes-bambulab.

For local development with the included Docker setup:

npm install
npm run build
docker compose up -d

# After code changes:
npm run build
docker compose restart n8n

n8n is available at http://localhost:5678.

Operations

Node: Bambu Lab Printer

An action node for on-demand operations.

Operation	Description
Get Status	Request a full status push from the printer

Response mode (Get Status):

• Summary — Normalized status object with named fields (temperatures, progress, state, etc.)
• Raw — Full raw MQTT payload from the printer

Node: Bambu Lab Printer Trigger

A trigger node for event-driven workflows. Maintains a persistent MQTT connection and polls the printer on a configurable interval.

Parameter	Description
Poll Interval (seconds)	How often to request fresh status from the printer (minimum 5s, default 30s)
Response Mode	Summary — normalized fields. Raw — full MQTT payload
Filter Mode	Controls when events are emitted (see below)

Filter modes:

Mode	Behaviour
Any Field Change (default)	Emits a full snapshot on startup, then fires again whenever a watched field crosses its threshold
Printer State Only	Fires only when gcode_state changes (e.g. IDLE → RUNNING → FINISH)
Every Message	Fires on every MQTT message received — use with care

Any Field Change options (shown when that mode is selected):

Parameter	Default	Description
Trigger On Fields	State, Stage, Layer, Progress, Temps, Error	Checklist of which fields can trigger an event. All fields appear in the output regardless.
Layer Change Threshold	1	Minimum layers between events
Progress Threshold (%)	5	Minimum % progress change between events
Temperature Threshold (°C)	2	Minimum °C change for actual temps (nozzle, bed, chamber)
Target Temp Threshold (°C)	1	Minimum °C change for target temperatures

Output fields (in Summary mode) include: state, stage, progress_pct, current_layer, total_layers, nozzle_temp_c, bed_temp_c, nozzle_target_c, bed_target_c, chamber_temp_c, task_name, error_code, speed_level, chamber_light, wifi_signal, received_at, and more.

In Any Field Change mode the output also includes a triggered_by object showing which fields changed and their before/after values — useful for debugging unexpected events:

"triggered_by": {
  "current_layer": { "from": 20, "to": 25 },
  "progress_pct": { "from": 23, "to": 28 }
}

Credentials

Credential type: Bambu Lab (Local Network)

Field	Description
Printer IP Address	Local IP of the printer
Printer Serial Number	Uppercase alphanumeric serial (e.g. 01P00C5A...)
Access Code	8-character access code

Where to find these on the printer touchscreen:

• Settings > Network / WLAN — IP address and Access Code
• Settings > Device — Serial number

Security notes:

• Credentials are stored encrypted by n8n and never written into workflow JSON as plaintext.
• MQTT traffic is TLS-encrypted on port 8883.
• Certificate verification is disabled for local printer TLS (Bambu printers use a private CA).
• Do not expose printer network endpoints to the public internet.

Compatibility

• Minimum tested n8n version: 2.13.4
• Tested on: Docker image n8nio/n8n:2.13.4
• Tested printers: Bambu Lab X1C, P1S (reports from community welcome)

Known behavior:

• Imported workflows require credentials to be re-selected once in the UI to bind local credential IDs.
• The Bambu MQTT broker is point-to-point — report messages are only delivered to the requesting client, not broadcast. This is why the trigger node sends its own PUSH_ALL request rather than passively subscribing.
• Bambu printers allow only one MQTT client at a time. If another device connects to the printer while the trigger node is running, the node will be disconnected. It reconnects automatically within a few seconds and resumes polling, but any events that occurred during the reconnect window will be missed.

Usage

Example: Print complete notification

1. Add a Bambu Lab Printer Trigger node
2. Set Filter Mode to Printer State Only
3. Connect an IF node: condition state equals FINISH
4. Connect a Telegram (or other) node to send a notification

Example: Layer progress updates

1. Add a Bambu Lab Printer Trigger node
2. Leave Filter Mode as Any Field Change
3. Set Layer Change Threshold to 10 (fires every 10 layers)
4. Uncheck all Trigger On Fields except Current Layer
5. Use current_layer and total_layers in your downstream nodes

Example: Debugging unexpected events

If the trigger fires more often than expected, check the triggered_by field in the output — it shows exactly which field crossed its threshold (e.g. { "progress_pct": { "from": 23, "to": 28 } }). Uncheck that field in Trigger On Fields or raise its threshold.

Included workflow templates

• workflows/bambulab-showcase.workflow.json — manual status check and raw command example

Import:

docker compose exec n8n n8n import:workflow \
  --input=/custom-extensions/my-custom-node/workflows/bambulab-showcase.workflow.json

After importing, open the workflow in n8n and re-select your Bambu Lab Local credential on each node.

Resources

• n8n community nodes documentation
• Bambu Lab
• ha-bambulab — acknowledged reference for MQTT topic/payload structure

Changelog

See CHANGELOG.md for the full release history.