Enable an RTSP Server on a RTS3903N Tuya based camera

---

This project is in development!

Features

• High or low resolution RTSP feed
• Uses original Tuya services
• Audio
• Telnet/Root available (disabled by default)
• Fully featured Busybox
• Automatic backup of firmware to /sdcard/backup
• This 'hack' is not permanent and is disabled when the sdcard is removed

---

Getting started

1. Identify the firmware version of your camera by using the mobile app (if not sure, use the latest patched binary in table)
2. Download the relevant tycam version from the Patched binaries table (see below)
3. Copy all contents of sdcard folder to the root sd card
4. Copy the downloaded tycam to the root of your sd card
5. Insert sd card into your camera, wait 1 minute and try to connect to the RTSP server

---

Patched binaries

Version	Original	Low Res	High Res
2.1.0#20181212-22	original	low res	high res
2.2.1#20190116	original	low res	high res
2.5	Use 2.2	Use 2.2	Use 2.2

---

Root access / telnet

1. Open ty_sdcard_upgrade.sh
2. Uncomment #telnetd -l /bin/sh &

---

RTSP

Connection details are rtsp://{IP_ADDRESS}:8554/

---

Devices

Title	Model	Link
Woox Smart Camera 1080P	R4958	Amazon
Tuya	SC-WA002	Tuya

---

Problems

• Open an issue and attach a copy of your firmware backup from /sdcard/backup
• Please note: Your WiFI credentials will be embedded and camera token

---

Development resources

• cjj25/RTS3903N-Tools
• cjj25/Yi-RTS3903N-RTSPServer
• cjj25/RTS3903N-rsdk-4.8.5-5281 (Toolchain)