Skip to content

About

No description or website provided.

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Latest commit

 

History

4 Commits

Folders and files

Repository files navigation

Sequential Bridge for Autodesk Fusion

Sequential Bridge icon

A Fusion add-in that adds sequential bridging to a hole, so a hole that starts in mid-air (above a nut pocket, counterbore or any other recess) 3D prints cleanly without supports.

You pick one face, choose how many bridge layers you want, and the add-in builds the geometry for you as ordinary timeline features.

The technique is the one shown by Maker's Muse in How to 3D Print bores without supports.

What it does

When a part is printed pocket-down, the first layer above the pocket has nothing under it where the smaller hole begins. A round hole cannot be bridged, but straight lines can. Sequential bridging replaces the round opening with shapes made of straight bridges, one layer at a time:

Layer Opening left in that layer Why it prints
1 A slot as wide as the hole, across the whole pocket Two straight bridges from pocket wall to pocket wall
2 A square around the hole Two short bridges resting on the layer-1 bridges
3 An octagon Four corner bridges resting on the square
4, 5 16 and 32 sides Each new edge rests on the layer before
after The round hole Only tiny overhangs are left

Two layers are enough for small holes (an M6 bolt hole, for example). Use three or more for larger holes.

Cut, 3 bridges, rectangular pocket Add, 3 bridges, hex pocket
Cut example Add example

Both pictures look up into the pocket from the print bed side.

Install

  1. Download this repository (Code > Download ZIP) and unzip it, or clone it.
  2. In Fusion open Utilities > Add-Ins > Scripts and Add-Ins (or press Shift+S).
  3. Click +, choose Script or add-in from device, and select the SequentialBridge folder (the one that contains SequentialBridge.manifest).
  4. Turn on Run for SequentialBridge. Tick Run on Startup if you want it loaded every time.

The command appears in the Design workspace under Solid > Modify > Sequential Bridge. You can also press S and search for "Sequential Bridge".

Use

  1. Start Sequential Bridge.
  2. Select the flat face that the hole goes through: the "ceiling" of the pocket, the face that would be unsupported when printing. Only flat faces with a round hole can be picked.
  3. Adjust the settings. The preview updates as you change them.
  4. Click OK.

Settings

Setting Default Meaning
Face The flat face with the round hole.
Bridges 2 Number of bridge layers, 1 to 5.
Layer height 0.2 mm Thickness of each bridge layer. Must match the layer height you slice with.
Operation Cut Cut removes the layers from the solid behind the face, so the pocket keeps its depth and the hole gets shorter by bridges x layer height. Add builds the layers in front of the face, so the hole keeps its length and the pocket gets shallower by the same amount.
Rotate bridges 0 deg Turns the direction of the first bridges. At 0 the add-in chooses the direction itself.

How the bridge direction is chosen

The first bridges should be as short as possible. The add-in looks at the outline of the selected face:

  • If the pocket has straight walls, it tries the directions along and across each wall and keeps the one with the shortest bridges. Bridges always stay parallel or square to a wall.
  • If the pocket is round, every direction is equal and it uses the face's own X direction.

Use Rotate bridges (for example 90 deg) if you want a different direction.

Result in the timeline

Each run adds one group named Sequential Bridge containing sketches, extrudes and one combine. To remove the bridges, delete that group. To change them, delete the group and run the command again.

Printing notes

  • Layer height must match the slicer. The bridges only work if each modelled layer is exactly one printed layer.
  • The face should land on a layer boundary. If the pocket depth is not a multiple of the layer height, the slicer will round it and the bridge layers may merge or split.
  • Print with the pocket facing the bed, as in the pictures above.

Limits

  • Round holes only. Slots and other shapes are ignored. Several round holes in one face are handled together in a single run.
  • The bridge outlines are fixed when the command runs. If you later move or resize the hole, delete the timeline group and run the command again.
  • With Cut, a hole that sits closer to a pocket wall than its own radius is still handled, but the bridge layers are trimmed at the wall.

Troubleshooting

  • The command is missing from the Modify menu: the add-in is not running. Open Scripts and Add-Ins (Shift+S) and turn on Run for SequentialBridge.
  • A face cannot be selected: it is not flat or has no round hole in it.
  • Something failed: errors are written to SequentialBridge.log in your temp folder (%TEMP% on Windows, $TMPDIR on macOS).

Repository layout

Path Contents
SequentialBridge/SequentialBridge.py The command: dialog, face analysis, feature creation.
SequentialBridge/bridge_geometry.py The 2D geometry (layer outlines, bridge direction). No Fusion imports.
SequentialBridge/selftest.py Developer self-test that runs inside Fusion.
SequentialBridge/resources/ Toolbar icons.
tests/ Unit tests for the geometry.
tools/make_icon.py Script that draws the icons.

Development

The geometry has no Fusion dependency and can be tested with plain Python:

python -m unittest discover -s tests

To test the feature creation inside Fusion, start Fusion with the environment variable SEQ_BRIDGE_SELFTEST set to an output folder and the add-in set to run on startup. It builds eight sample parts in a new document, runs every mode on them, compares the volume change with hand-calculated values, and writes selftest_result.json plus screenshots to that folder. The self-test never runs without that variable.

To regenerate the icons (requires Pillow):

python tools/make_icon.py SequentialBridge/resources

Tested on Windows with Fusion 2706.1.17.

License

MIT

About

No description or website provided.

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages