Skip to content

About

Linux VST3 plugin for the Elektron Digitone II. Multichannel USB audio, every sound, mixer and FX parameter with DAW automation, a graphical editor and a +Drive preset browser.

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Latest commit

 

History

1 Commit

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

OpenBridge – Digitone II

Linux implementation of Elektron Overbridge for the Elektron Digitone II:

OpenBridge Digitone II, track page

Features

  • Multichannel USB audio: Main, Track 1–16, FX and Ext-In outputs (42 channels) and the 8 inputs, with clock-drift compensation between the DAW and the device.
  • Every sound parameter of the 16 tracks (FM Tone, FM Drum, WaveTone, Swarmer, MIDI machines; all filter machines), read from the device and editable, with DAW automation.
  • Editor: machine pages, filter, amp, LFOs, modulation (key tracking, pitch bend, velocity, mod wheel, breath, aftertouch), SETUP (TRK, VOICE, PORTAMENTO, LAYER), send FX, mixer with level meters, compressor, Ext-In, on-screen keyboard.
  • Mixer: track levels, mutes, pattern mutes, solo, pan, send FX, master and compressor, read from the device when the plugin opens.
  • Preset Browser: kit track presets, +Drive library (banks A–H, tags, filters); load a +Drive preset into a track; Clear a track.

Requirements

  • Linux x86_64, Ubuntu 22.04 or later (or a distribution with glibc 2.35 or later).
  • An Elektron Digitone II on OS 1.12 or later. Older OS versions do not answer the mixer and FX messages.

Installation

.deb package (Ubuntu / Debian)

Download openbridge-digitone2_0.1_amd64.deb from the Releases page, then:

sudo apt install ./openbridge-digitone2_0.1_amd64.deb

It installs:

  • the VST3 plugin in /usr/lib/vst3/OpenBridge Digitone II.vst3;
  • a udev rule that gives the logged-in user access to Elektron USB devices.

Unplug and replug the Digitone after installing.

Archive

openbridge-digitone2-0.1-linux-x86_64.tar.gz holds the same files.

  1. Copy OpenBridge Digitone II.vst3 to ~/.vst3/.

  2. Install the udev rule:

    sudo cp 70-openbridge-elektron.rules /etc/udev/rules.d/
    sudo udevadm control --reload-rules

Building from source

Dependencies (Ubuntu 22.04 package names):

sudo apt install build-essential cmake ninja-build pkg-config libusb-1.0-0-dev libsamplerate0-dev libasound2-dev libjack-jackd2-dev libfreetype-dev libx11-dev libxext-dev libxrandr-dev libxinerama-dev libxcursor-dev

You also need JUCE 7, in one of two ways:

  • Packaged JUCE: install the juce-modules-source package (Ubuntu 24.04 and later, Debian).
  • JUCE sources: download JUCE 7.0.5 and pass its folder with -DOB_JUCE_DIR=/path/to/JUCE.
cmake -S . -B build -G Ninja -DCMAKE_BUILD_TYPE=Release
ninja -C build

The plugin is in build/OpenBridgeDigitone2_artefacts/Release/VST3/.

Not available yet

  • Delay time: shown as a raw value, not as a note length.

Disclaimer

OpenBridge is an independent project. It is not affiliated with, endorsed or supported by Elektron. Elektron, Overbridge and Digitone are trademarks of Elektron Music Machines MAV AB. Use it at your own risk.

License

GPL-3.0. See LICENSE. Built with JUCE under its GPL licence.

About

Linux VST3 plugin for the Elektron Digitone II. Multichannel USB audio, every sound, mixer and FX parameter with DAW automation, a graphical editor and a +Drive preset browser.

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages