diff --git a/dingtek-do200/CHANGELOG.md b/dingtek-do200/CHANGELOG.md new file mode 100644 index 000000000..d86775c7c --- /dev/null +++ b/dingtek-do200/CHANGELOG.md @@ -0,0 +1,5 @@ +# Changelog + +## 1.0.0 - 2026-06-09 + +- First version of plugin \ No newline at end of file diff --git a/dingtek-do200/LICENSE.md b/dingtek-do200/LICENSE.md new file mode 100644 index 000000000..bffeef341 --- /dev/null +++ b/dingtek-do200/LICENSE.md @@ -0,0 +1,7 @@ +Copyright 2026 Thinger.io + +Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. \ No newline at end of file diff --git a/dingtek-do200/README.md b/dingtek-do200/README.md new file mode 100644 index 000000000..3f936ba6f --- /dev/null +++ b/dingtek-do200/README.md @@ -0,0 +1,58 @@ +# DO200 - Parking Occupancy Sensor + +The CNDingtek DO200 is a parking occupation sensor with combination of ultrasonic and magnetic detection, fire sensor, and accelerometer. Designed for smart parking applications, this device provides accurate vehicle detection and monitoring capabilities through LoRaWAN connectivity. + +## Features + +- **Dual Detection Technology**: Combines ultrasonic and magnetic sensors for reliable occupancy detection +- **Fire Detection**: Integrated fire sensor for enhanced safety monitoring +- **Motion Sensing**: Built-in accelerometer for tamper detection and device positioning +- **Robust Design**: IP68 enclosure for outdoor installation +- **Wide Operating Range**: Functions in temperatures from -20°C to 70°C +- **Compact Form Factor**: 115mm diameter, 50mm height +- **Battery Powered**: Non-rechargeable battery for autonomous operation + +## Use Cases + +- Smart parking lot management +- Real-time parking space monitoring +- Urban parking guidance systems +- Commercial and residential parking facilities +- Street parking occupancy detection +- Parking revenue optimization + +## Thinger.io Integration + +This device integrates with Thinger.io through LoRaWAN connectivity, enabling real-time monitoring of parking space occupancy status, fire detection alerts, and device tampering notifications. + +## Requirements + +A LoRaWAN server is required to communicate the CNDingtek DO200 into Thinger.io, some options are: + +- [The Things Stack](https://www.thethingsindustries.com/stack/) +- [LORIOT](https://loriot.io/) +- [ChirpStack](https://www.chirpstack.io/) + +Alongside, the corresponding plugin for the selected LoRaWAN server needs to be installed in your Thinger.io instance. + +## Get Started + +### Installation + +Look for the plugin in the [Thinger.io Plugin Store](https://marketplace.thinger.io/) and install it in your Thinger.io instance. Once the plugin is installed a new Product will be created for this device. + +### Configuration + +The Product is already preconfigured, check that the auto provision prefix matches the one selected in your LoRaWAN server plugin in Thinger.io, or change it to your desire. + +### Usage + +Start sending uplinks for autoprovisioning devices and buckets. +This product also provides a predefined dashboard and downlinks. + +## Additional Resources + +CNDingtek resources can be found at: + +- [Device Repository](https://www.thethingsnetwork.org/device-repository/devices/dingtek/do200) +- [Thinger docs](https://docs.thinger.io) \ No newline at end of file diff --git a/dingtek-do200/assets/do200.png b/dingtek-do200/assets/do200.png new file mode 100644 index 000000000..f59963a3a Binary files /dev/null and b/dingtek-do200/assets/do200.png differ diff --git a/dingtek-do200/plugin.json b/dingtek-do200/plugin.json new file mode 100644 index 000000000..c96e38c07 --- /dev/null +++ b/dingtek-do200/plugin.json @@ -0,0 +1,125 @@ +{ + "name": "dingtek_do200", + "version": "1.0.0", + "description": "The CNDingtek do200 is parking occupation sensor with combination of ultrasonic and magnetic detection , fire sensor, and accelerometer.", + "author": "Thinger.io", + "license": "MIT", + "repository": { + "type": "git", + "url": "https://github.com/thinger-io/plugins.git", + "directory": "dingtek-do200" + }, + "metadata": { + "name": "Dingtek DO200", + "description": "The CNDingtek do200 is parking occupation sensor with combination of ultrasonic and magnetic detection , fire sensor, and accelerometer.", + "image": "assets/do200.png", + "category": "devices", + "vendor": "dingtek" + }, + "resources": { + "products": [ + { + "description": "The CNDingtek do200 is parking occupation sensor with combination of ultrasonic and magnetic detection , fire sensor, and accelerometer.", + "enabled": true, + "name": "Dingtek DO200", + "product": "dingtek_do200", + "profile": { + "api": { + "downlink": { + "enabled": true, + "handle_connectivity": false, + "request": { + "data": { + "path": "/downlink", + "payload": "{\n \"data\" : \"{{payload.data=\"\"}}\",\n \"port\" : {{payload.port=3}},\n \"priority\": {{payload.priority=3}},\n \"confirmed\" : {{payload.confirmed=false}},\n \"uplink\" : {{property.uplink}} \n}", + "payload_function": "", + "payload_type": "", + "plugin": "{{property.uplink.source}}", + "target": "plugin_endpoint" + } + } + }, + "uplink": { + "device_id_resolver": "getId", + "enabled": true, + "handle_connectivity": true, + "request": { + "data": { + "payload": "{{payload}}", + "payload_function": "", + "payload_type": "source_payload", + "resource_stream": "uplink", + "target": "resource_stream" + } + } + } + }, + "buckets": { + "dingtek_do200_data": { + "backend": "mongodb", + "data": { + "payload": "{{payload}}", + "payload_function": "", + "payload_type": "source_payload", + "resource_stream": "uplink_decoded", + "source": "resource_stream" + }, + "enabled": true, + "retention": { + "period": 3, + "unit": "months" + }, + "tags": [] + } + }, + "code": { + "code": "function decodeThingerUplink(thingerData) {\n // 0. If data has already been decoded, we will return it\n if (thingerData.decodedPayload) return thingerData.decodedPayload;\n \n // 1. Extract and Validate Input\n // We need 'payload' (hex string) and 'fPort' (integer)\n const hexPayload = thingerData.payload || \"\";\n const port = thingerData.fPort || 1;\n\n // 2. Convert Hex String to Byte Array\n const bytes = [];\n for (let i = 0; i < hexPayload.length; i += 2) {\n bytes.push(parseInt(hexPayload.substr(i, 2), 16));\n }\n\n // 3. Dynamic Function Detection and Execution\n \n // CASE A: (The Things Stack v3)\n if (typeof decodeUplink === 'function') {\n try {\n const input = {\n bytes: bytes,\n fPort: port\n };\n var result = decodeUplink(input);\n \n if (result.data) return result.data;\n\n return result; \n } catch (e) {\n console.error(\"Error inside decodeUplink:\", e);\n throw e;\n }\n }\n\n // CASE B: Legacy TTN (v2)\n else if (typeof Decoder === 'function') {\n try {\n return Decoder(bytes, port);\n } catch (e) {\n console.error(\"Error inside Decoder:\", e);\n throw e;\n }\n }\n\n // CASE C: No decoder found\n else {\n throw new Error(\"No compatible TTN decoder function (decodeUplink or Decoder) found in scope.\");\n }\n}\n\n\n// TTN decoder\nvar units = [' ℃', ' hours', ' minutes', ' mm', ' °', ' cm'];\n//IEEE754 hex to float convert\nfunction hex2float(num) {\n var sign = num & 0x80000000 ? -1 : 1;\n var exponent = ((num >> 23) & 0xff) - 127;\n var mantissa = 1 + (num & 0x7fffff) / 0x7fffff;\n return sign * mantissa * Math.pow(2, exponent);\n}\n\nfunction decodeUplink(input) {\n if (input.fPort != 3) {\n return {\n errors: ['unknown FPort'],\n };\n }\n\n switch (input.bytes.length) {\n case 21:\n var mag_x = (input.bytes[11] << 8) + input.bytes[12];\n var mag_y = (input.bytes[13] << 8) + input.bytes[14];\n var mag_z = (input.bytes[15] << 8) + input.bytes[16];\n return {\n // Decoded data\n data: {\n level: (input.bytes[5] << 8) + input.bytes[6],\n volt: ((input.bytes[9] << 8) + input.bytes[10]) / 100,\n alarmPark: Boolean(input.bytes[7] >> 4),\n alarmLevel: Boolean(input.bytes[7] & 0x0f),\n alarmMagnet: Boolean(input.bytes[8] >> 4),\n alarmBattery: Boolean(input.bytes[8] & 0x0f),\n xMagnet: mag_x > 32767 ? mag_x - 65536 : mag_x,\n yMagnet: mag_y > 32767 ? mag_y - 65536 : mag_y,\n zMagnet: mag_z > 32767 ? mag_z - 65536 : mag_z,\n Frame_Counter: (input.bytes[17] << 8) + input.bytes[18],\n },\n };\n\n case 17:\n var data_type = input.bytes[3];\n if (data_type === 0x03) {\n return {\n // Decoded parameter\n data: {\n firmware: input.bytes[5] + '.' + input.bytes[6],\n uploadInterval: input.bytes[7],\n ultraDetectInterval: input.bytes[8],\n magDetectInterval: input.bytes[9],\n magThreshold: (input.bytes[12] << 8) + input.bytes[13],\n },\n };\n }\n default:\n return {\n errors: ['wrong length'],\n };\n }\n}\n\nfunction encodeDownlink(input) {\n if (input.data.uploadInterval != null && !isNaN(input.data.uploadInterval)) {\n var periodic_interval = input.data.uploadInterval;\n var periodic_interval_high = periodic_interval.toString(16).padStart(2, '0').toUpperCase()[0].charCodeAt(0);\n var periodic_interval_low = periodic_interval.toString(16).padStart(2, '0').toUpperCase()[1].charCodeAt(0);\n if (periodic_interval > 168 || periodic_interval < 1) {\n return {\n errors: ['periodic upload interval range 1-168 hours.'],\n };\n } else {\n return {\n // LoRaWAN FPort used for the downlink message\n fPort: 3,\n // Encoded bytes\n bytes: [0x38, 0x30, 0x30, 0x32, 0x38, 0x38, 0x38, 0x38, 0x30, 0x31, periodic_interval_high, periodic_interval_low, 0x38, 0x31],\n };\n }\n }\n if (input.data.ultraDetectionInterval != null && !isNaN(input.data.ultraDetectionInterval)) {\n var detection_interval = input.data.ultraDetectionInterval;\n var detection_interval_high = detection_interval.toString(16).padStart(2, '0').toUpperCase()[0].charCodeAt(0);\n var detection_interval_low = detection_interval.toString(16).padStart(2, '0').toUpperCase()[1].charCodeAt(0);\n if (detection_interval > 60 || detection_interval < 1) {\n return {\n errors: ['ultra detection interval range 1-60 minutes.'],\n };\n } else {\n return {\n // LoRaWAN FPort used for the downlink message\n fPort: 3,\n // Encoded bytes\n bytes: [0x38, 0x30, 0x30, 0x32, 0x38, 0x38, 0x38, 0x38, 0x30, 0x33, detection_interval_high, detection_interval_low, 0x38, 0x31],\n };\n }\n }\n if (input.data.magDetectInterval != null && !isNaN(input.data.magDetectInterval)) {\n var detection_interval = input.data.magDetectInterval;\n var detection_interval_high = detection_interval.toString(16).padStart(2, '0').toUpperCase()[0].charCodeAt(0);\n var detection_interval_low = detection_interval.toString(16).padStart(2, '0').toUpperCase()[1].charCodeAt(0);\n if (detection_interval > 60 || detection_interval < 1) {\n return {\n errors: ['mag detection interval range 1-60 seconds.'],\n };\n } else {\n return {\n // LoRaWAN FPort used for the downlink message\n fPort: 3,\n // Encoded bytes\n bytes: [0x38, 0x30, 0x30, 0x32, 0x38, 0x38, 0x38, 0x38, 0x30, 0x34, detection_interval_high, detection_interval_low, 0x38, 0x31],\n };\n }\n }\n\n if (input.data.batteryThreshold != null && !isNaN(input.data.batteryThreshold)) {\n var batteryThreshold = input.data.batteryThreshold;\n var batteryThreshold_high = batteryThreshold.toString(16).padStart(2, '0').toUpperCase()[0].charCodeAt(0);\n var batteryThreshold_low = batteryThreshold.toString(16).padStart(2, '0').toUpperCase()[1].charCodeAt(0);\n if (batteryThreshold > 99 || batteryThreshold < 5) {\n return {\n errors: ['battery alarm threshold range 5-99 %.'],\n };\n } else {\n return {\n // LoRaWAN FPort used for the downlink message\n fPort: 3,\n // Encoded bytes\n bytes: [0x38, 0x30, 0x30, 0x32, 0x38, 0x38, 0x38, 0x38, 0x30, 0x35, batteryThreshold_high, batteryThreshold_low, 0x38, 0x31],\n };\n }\n }\n if (input.data.magThreshold != null && !isNaN(input.data.magThreshold)) {\n var magThreshold = input.data.magThreshold;\n var magThreshold_high = magThreshold.toString(16).padStart(2, '0').toUpperCase()[0].charCodeAt(0);\n var magThreshold_low = magThreshold.toString(16).padStart(2, '0').toUpperCase()[1].charCodeAt(0);\n if (magThreshold > 255 || magThreshold < 1) {\n return {\n errors: ['Geomagnet threshold range 1-255 mGs.'],\n };\n } else {\n return {\n // LoRaWAN FPort used for the downlink message\n fPort: 3,\n // Encoded bytes\n bytes: [0x38, 0x30, 0x30, 0x32, 0x38, 0x38, 0x38, 0x38, 0x30, 0x32, magThreshold_high, magThreshold_low, 0x38, 0x31],\n };\n }\n }\n\n return {\n errors: ['invalid downlink parameter.'],\n };\n}\n\nfunction decodeDownlink(input) {\n var input_length = input.bytes.length;\n if (input.fPort != 3) {\n return {\n errors: ['invalid FPort.'],\n };\n }\n\n if (\n input_length < 12 ||\n input.bytes[0] != 0x38 ||\n input.bytes[1] != 0x30 ||\n input.bytes[2] != 0x30 ||\n input.bytes[3] != 0x32 ||\n input.bytes[4] != 0x38 ||\n input.bytes[5] != 0x38 ||\n input.bytes[6] != 0x38 ||\n input.bytes[7] != 0x38 ||\n input.bytes[input_length - 2] != 0x38 ||\n input.bytes[input_length - 1] != 0x31\n ) {\n return {\n errors: ['invalid format.'],\n };\n }\n var option = parseInt(String.fromCharCode(input.bytes[8]) + String.fromCharCode(input.bytes[9]), 16);\n var value = parseInt(String.fromCharCode(input.bytes[10]) + String.fromCharCode(input.bytes[11]), 16);\n switch (option) {\n case 1:\n return {\n data: {\n uploadInterval: value,\n },\n };\n case 2:\n return {\n data: {\n magThreshold: value,\n },\n };\n case 3:\n return {\n data: {\n ultraDetectInterval: value,\n },\n };\n case 4:\n return {\n data: {\n magDetectInterval: value,\n },\n };\n case 5:\n return {\n data: {\n batteryThreshold: value,\n },\n };\n default:\n return {\n errors: ['invalid parameter key.'],\n };\n }\n}\n", + "environment": "javascript", + "storage": "", + "version": "1.0" + }, + "flows": { + "dingtek_do200_decoder": { + "data": { + "payload": "{{payload}}", + "payload_function": "decodeThingerUplink", + "payload_type": "source_payload", + "resource": "uplink", + "source": "resource", + "update": "events" + }, + "enabled": true, + "sink": { + "payload": "{{payload}}", + "payload_function": "", + "payload_type": "source_payload", + "resource_stream": "uplink_decoded", + "target": "resource_stream" + }, + "split_data": false + } + }, + "properties": { + "uplink": { + "data": { + "payload": "{{payload}}", + "payload_function": "", + "payload_type": "source_payload", + "resource": "uplink", + "source": "resource", + "update": "events" + }, + "default": { + "source": "value" + }, + "enabled": true + } + } + }, + "_resources": { + "properties": [] + } + } + ] + } +} \ No newline at end of file