indec.md

Entity: indec

• File: indec.sv

Diagram

Ports

Port name	Direction	Type	Description
clk_i	input		system clock
rst_in	input		system reset, low active
stb_i	input		flag for valid op-code input
opc_i	input	[ 7:0]	command op-code
sft_rst_o	output		perform soft reset
arm_o	output		arm the trigger
id_o	output		request for device identification
set_mask_o	output		set mask for trigger
set_val_o	output		set trigger values
set_cfg_o	output		configure trigger stage
set_div_o	output		set frequency divider
set_cnt_o	output		set the amount of samples to return
set_flgs_o	output		configure flags
stg_o	output	[ 1:0]	stage
xon_o	output		put transmitter out of pause mode
xoff_o	output		put transmitter in pause mode
rd_meta_o	output
fin_now_o	output
rd_inp_o	output
arm_adv_o	output
set_adv_cfg_o	output
set_adv_dat_o	output

Signals

Name	Type	Description
opc	opcode_t
f_init	logic

Processes

• opcode_decoding: ( )
  • Type: always_comb
• f_initial_reset: ( @(posedge clk_i) )
  • Type: always_ff
• f_inputs_ok: ( @(posedge clk_i) )
  • Type: always_ff