Contribute country/vendor specific frequency information here

[berkon]

This issue will be kept open forever. It is thought for all of you who can/want to contribute all sort of frequency related information. You don't need any programming skills at all. Just let me know what YOU know about specific regulations in your country or yet unknown vendors. In regards to the Wireless Microphone Analyzer this especially means:

• Forbidden frequency ranges for certain countries

• Frequency ranges which vendors use in their products (and are missing in the tool)

• Recommended channel presets of vendors

[nerdymedic]

wireless_models.xlsx

[tapakj]

Added Audix Performance R41/R42 and R61/R62 series to excel.
wireless_models.xlsx
Please, could be possible to add them? Thank you in advance.

[berkon]

@tapakj, I've just released version V1.6.1 which contains the new frequency ranges. Have fun. :-)

[petejonessound]

Hi, love this software. It's a great way to connect to the rf explorer with just the features we need as audio people. My one suggestion would be to be able to set a more detailed rbw (ie more scann points). Please find info on the Australian RF situation attached.
Australia Wireless Mics.xlsx

[berkon]

Hi, love this software. It's a great way to connect to the rf explorer with just the features we need as audio people. My one suggestion would be to be able to set a more detailed rbw (ie more scann points). Please find info on the Australian RF situation attached.
Australia Wireless Mics.xlsx

@petejonessound, thanks for your contribution. I'll add the data asap. Unfortunately the number of scan points is limited by the hardware to 112 point for the handheld devices and to 224 points on the RackPro. Thus I can only show what the hardware is willing to give me. ;-)

[petejonessound]

Hi Bernd I think you can now change the number of points. In the RF Explorer for windows software you can go to the "device" menu and there is an option to "define sweep points" which allows you to select up to 2048. In Touchstone you can also set the RBW directly, although I think it does this by performing multiple smaller sweeps. I admit I have no concept of how difficult this might be to implement as I have basically no coding skills. Thanks again, really cool that you put the time into this project. Pete Jones

…

On Sat, 27 Feb 2021 at 22:32, Bernd Konnerth ***@***.***> wrote: Hi, love this software. It's a great way to connect to the rf explorer with just the features we need as audio people. My one suggestion would be to be able to set a more detailed rbw (ie more scann points). Please find info on the Australian RF situation attached. Australia Wireless Mics.xlsx <https://github.com/berkon/wireless-microphone-analyzer/files/6054228/Australia.Wireless.Mics.xlsx> @petejonessound <https://github.com/petejonessound>, thanks for your contribution. I'll add the data asap. Unfortunately the number of scan points is limited by the hardware to 112 point for the handheld devices and to 224 points on the RackPro. Thus I can only show what the hardware is willing to give me. ;-) — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#2 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATANV5H6THA3VZPXQ274HODTBDJ5LANCNFSM4GT6C7JA> .

[berkon]

Hi Pete,
nice to hear that you my tool. I used it a lot myself, for my the events where I was playing as a DJ ... before Corona. ;-) I heard that Australia is handling the crisis quite well. So you are probably allowed to have parties again.

Thanks for that hint I was not aware of that feature. But I checked and according to the release notes for version software v2.3.2101, it looks like this mode is only available for specific devices (WSUB1G PLUS and ProAudio spectrum analyzers). In my case that option in the menu is there, but grayed out. I have the WSUB3G, but not the PLUS version.

Indeed it would be an interesting idea to scan with a very small span e.g. 10 times and thus get 112 * 10 sweep points. The only problem is that at least on my device one single sweep takes a (short) time (depending on the span size). Thus multiplying that time by 10 would surely not show a graph moving in real time anymore.

By the way, do you also have a list of forbidden frequency ranges for Australia? Im asking because that is the basis for my tool. If there is no such data available for a specific country, currently it is currently not possible to switch to that country, even though TV-channel data is available. I will probably change that in future, but for now I need such data. In worst case I could take over the data from another country (does US data fit somehow?) or I can simply enter an invisible dummy range.

[petejonessound]

Hi Bernd Ah Ok, I have a WSUB1G+, I didn't know some of them didn't do that. The way I usually use the RF Explorer is to do multiple continuous scans over a period, and use the peak hold trace, so a slower rate isn't a problem. The frequencies I gave you are the ones allowed In Australia, so all other frequencies are forbidden. The broadcast TV channels are different in each state capital city, those are the ones marked in orange, but they are not forbidden as such. These are only really valid for the centre of those cities, and regional towns and outer suburbs may have a different TV situation, but the overall bands allowed are the same. There is a lot more spectrum available here than the US and Europe. This is the official government page which describes the situation if that helps : https://www.acma.gov.au/wireless-microphones. Yes we are still able to have some events, but only with small audiences in person. We are still doing a lot of webcasts and online events though.

…

On Sun, 28 Feb 2021, 10:22 am Bernd Konnerth, ***@***.***> wrote: Hi Pete, nice to hear that you my tool. I used it a lot myself, for my the events where I was playing as a DJ ... before Corona. ;-) I heard that Australia is handling the crisis quite well. So you are probably allowed to have parties again. Thanks for that hint I was not aware of that feature. But I checked and according to the release notes <https://j3.rf-explorer.com/download/sw/win/WindowsClientReleaseNotes.pdf> for version software v2.3.2101, it looks like this mode is only available for specific devices (WSUB1G PLUS and ProAudio spectrum analyzers). In my case that option in the menu is there, but grayed out. I have the WSUB3G, but not the PLUS version. Indeed it would be an interesting idea to scan with a very small span e.g. 10 times and thus get 112 * 10 sweep points. The only problem is that at least on my device one single sweep takes a (short) time (depending on the span size). Thus multiplying that time by 10 would surely not show a graph moving in real time anymore. By the way, do you also have a list of forbidden frequency ranges for Australia? Im asking because that is the basis for my tool. If there is no such data available for a specific country, currently it is currently not possible to switch to that country, even though TV-channel data is available. I will probably change that in future, but for now I need such data. In worst case I could take over the data from another country (does US data fit somehow?) or I can simply enter an invisible dummy range. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#2 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATANV5DIKOIQRNRCVR3KLHDTBF5DZANCNFSM4GT6C7JA> .

[berkon]

Hi Pete,

that's an interesting way how you are doing the scans indeed. I'll think of how I can implement such a specific mode. Could be quite useful.

I was wondering already why in US most audio engineers are dealing with TV-channels. So it looks like its the same in Australia. As I understand such frequencies are allowed to be used if not occupied by TV in that region. No way, here in Germany. :-) Here everything that's not allowed is forbidden. ;-) I still have an older Sennheiser system which uses frequencies which meanwhile have been dedicated to LTE. So there is just about 1-2 MHz which I can use at the border of the systems frequency range without interfering with LTE. Officially that's an LTE guard range and should/must not be used for wireless mics anymore. But to be honest ... on weddings you need the mic for 5min for the father of the bride. ;-) So I'm scanning with RF-Explorer if there is an LTE carrier in range. If not, I don't bother. If yes, they have to take a cable mic. ;-)