nothing happens

[bbd666]

Hi,
I'm using a Raspbery PI 3 modelB rev 1.2 OS64bits
and a TFT 480x320 3.5'' ILI9488 65Kcol

I installed :

pip3 install adafruit-circuitpython-lis3dh --break-package-system
pip3 install adafruit-circuitpython-rgb-display --break-package-system

SPI enabled

with

connections :
Vcc Pin 2 5V
Gnd Pin 6
CS Pin 24 / GPIO8
Reset Pin 11 / GPIO17
D/C Pin 22/ GPIO25
SDI(MOSI) Pin 19 / GPIO10
SCK Pin 23 / GPIO11
LED(BL) Pin 1 3.3V
SDO(MISO) Pin 21 / GPIO 9

when I run :

python test.py

import time
import busio
import digitalio
from board import SCK, MOSI, MISO, D2, D3

from adafruit_rgb_display import color565
import adafruit_rgb_display.ili9341 as ili9341


# Configuration for CS and DC pins:
CS_PIN = D2
DC_PIN = D3

# Setup SPI bus using hardware SPI:
spi = busio.SPI(clock=SCK, MOSI=MOSI, MISO=MISO)

# Create the ILI9341 display:
display = ili9341.ILI9341(spi, cs=digitalio.DigitalInOut(CS_PIN),
                          dc=digitalio.DigitalInOut(DC_PIN))

# Main loop:
while True:
    # Clear the display
    display.fill(0)
    # Draw a red pixel in the center.
    display.pixel(120, 160, color565(255, 0, 0))
    # Pause 2 seconds.
    time.sleep(2)
    # Clear the screen blue.
    display.fill(color565(0, 0, 255))
    # Pause 2 seconds.
    time.sleep(2)

nothing happens, i.e no error & white screen