LED mode sometimes doesn't change (or will turn off)

[Jigoku]

The mouse flashes when storing the color via;

change_color()
change_mode(1)
store_settings()

but will occasionally turn the LED off after storing the newly set color.

Most of the time the mouse sets and stores the color fine, but other times it results in the mouse flashing the newly set color, and then results in the mouse turning the LED off.

Investigate this;

As of the moment, the only way i can get the LED light to turn back on, is to boot up a virtual machine and set the color via the windows software or using the factory_reset() command.

[Jigoku]

It seems to be unpredictable when the LED turns off after setting and persistently storing the color.
Rarely it happens on the first color change, other times it take at least 10+ tries when switching the color.

[Jigoku]

After reversing some of the other features related to setting the LED, i believe this is the "on" switch;
0x07, 0x0b, 0x01, 0x00, 0x00, 0xaa, 0x00, 0x00 however it also sometimes ends up turning off, or being more dim that the color value would be expected. Changing the LED mode to breathe fixes it.

Possibly there is an alpha/opacity value that sets the "fade" level of the breathe mode?
Assuming this was set to max after turning the LED on, would keep it lit.

Just have to find it, if that is the case.

[Jigoku]

0x07, 0x0c, 0x01, 0x00, 0x0f, 0x00, 0x00, 0x00

Appears to turn the LED on... after being stuck off.

[Jigoku]

Possibly fixed. 99f4cc0

[Jigoku]

Now it seems the LED gets stuck randomly, applies to all modes.

[Jigoku]

Still broken, maybe go over the packet capture log process again, and have a second look.