Not open in w10

[brunodelucasbarbosa]

Using in Windows 10 with config in RUN-OUTSIDE-VM.ps1, after last check, in run VM, this VM not run, and not open by app Virtual Box...
Creating or modify not open, config:
┏[ 06/03/2026 @ 5:16:00 PM -03][ brunobarbosa ::  DESKTOP-IPE670N][ RAM: 11/31GB][ 0.008s]
┣[ ~\Desktop\Bruno\codigos\CloakBox-main]
└─[#]> .\RUN-OUTSIDE-VM.ps1
Successfully running with Administrator privileges.
Checking for running VirtualBox processes...
All VirtualBox processes have been terminated.

###################################################

BYPASS PROCTORING WITH CLOAKBOX

###################################################

This tool will help you configure your Cloakbox VM to avoid detection.

Default values are shown in [brackets].

[INFO] Detecting system hardware...

[WARNING] Hardware detection failed. Using defaults.

[WARNING] Could not auto-detect hardware. Please enter manually.

CPU Cores (e.g. 4, 8):: 8

RAM in GB (e.g. 16, 32):: 32

Free Storage in GB (e.g. 100):: 200

CPU Type (Intel/AMD):: AMD

==================== SYSTEM INFO (MANUAL) ================

CPU: AMD (8 cores)

RAM: 32 GB

Storage: 200 GB free

==========================================================

================ RECOMMENDED VM SETTINGS ================

CPU Cores: 4 cores (VM will use ~50% of your CPU)

RAM: 16 GB = 16384 MB (VM will use ~50% of your RAM)

Storage: 60 GB (Leaves space for host OS)

CPU Profile: AMD Ryzen 7 1800X

==========================================================

[TIP] These defaults allocate ~50% of your resources to the VM.

You can customize these in the next steps.

Enter the path to your Cloakbox/VirtualBox installation: [C:\Program Files\Vektor T13\VirtualBox] (e.g. C:\Program Files\Vektor T13\VirtualBox)

C:\Program Files\Oracle\VirtualBox

[INFO] Detected VirtualBox version: 7.2.8r173730

==================== MAIN MENU ===================

1. Create or Modify a VM

2. Delete a VM

3. Exit

Select an option (1-3): [1] (Choose what you want to do)

1

Available VMs on this system (May take a few seconds):

"w11ra" {95005a1e-a6f4-4ab6-a366-e343113eb391}
"w10" {439b48d6-e397-4842-9787-947f3b2ac0ec}

[TIP] Type a NEW name to create a VM, or an EXISTING name to modify it.

Enter the VM Name: w10

[INFO] VM 'w10' already exists. Will modify existing VM.

==================== UNATTENDED INSTALLATION ===================

[INFO] Skipping unattended install for existing VM.

==================== OPERATING SYSTEM ====================

Available Operating Systems:

1. Windows 11 (64-bit)

2. Windows 10 (64-bit)

Select Operating System (1-2): [2] (Windows 10 has better compatibility)

2

[OK] Selected: Windows 10 (64-bit)

==================== HARDWARE ===================

Base Memory Range: 1024 MB (1 GB) to 30720 MB (30 GB)

Enter memory size in MB: [16384] (Recommended: 16384 MB = 16 GB)

16384

Processors Range: 1 to 8 cores available

Enter number of CPU cores: [4] (Recommended: 4 cores (~50% of your system))

4

Available CPU models:

[INFO] Will try VirtualBox built-in profiles first, fallback to manual CPUID if needed

1. Intel Core i7-6700K

2. Intel Core i7-9700K

3. Intel Core i7-3960X

4. Intel Core i9-9900K

5. AMD Ryzen 7 1800X (RECOMMENDED)

6. Intel Core i7-7700K

Select a CPU model (1-6): [5] (Recommended based on your CPU type)

5

[OK] Selected: AMD Ryzen 7 1800X

Available Chipsets:

1. ICH9 (Recommended - Modern, supports PCIe)

2. PIIX3 (Legacy - Better compatibility with older OSes)

Select Chipset (1-2): [1] (ICH9 recommended for Windows 10/11)

1

Available TPM (Trusted Platform Module) options:

1. None (Good for anti-detection)

2. TPM v1.2

3. TPM v2.0 (Required for Windows 11)

[INFO] Windows 10 detected - TPM not required (better for anti-detection)

Select TPM version (1-3): [1] (None recommended for stealth)

1

Available Pointing Devices:

1. PS/2 Mouse (Recommended for anti-detection)

2. USB Tablet

3. USB Multi-Touch Tablet

4. USB Multi-Touch Touchscreen and TouchPad

Select pointing device (1-4): [1] (PS/2 Mouse recommended)

1

Enable I/O APIC? (Y/N) [Y] (Required for multi-core CPUs and 64-bit guests)

y

Enable PAE/NX? (Y/N) [Y] (Physical Address Extension - Required for 64-bit guests)

y

Enable Nested VT-x/AMD-V? (Y/N) [Y] (Allows running VMs inside the VM (may increase detection))

n

Available Paravirtualization Interfaces:

1. None (No paravirtualization)

2. Default (Let VirtualBox decide)

3. Legacy (Recommended for anti-detection)

4. Minimal (Minimal paravirtualization)

5. Hyper-V (Windows-optimized)

6. KVM (Linux-optimized)

Select Paravirtualization Interface (1-6): [3] (Legacy recommended for hiding VM)

3

Enable Nested Paging? (Y/N) [Y] (Hardware virtualization feature for better performance)

y

Enable hardware clock in UTC time? (Y/N) [N] (Useful for dual-boot systems)

n

[INFO] Windows 10 detected - BIOS mode is better for anti-detection

Enable UEFI (EFI) firmware? (Y/N) [N] (BIOS mode harder to detect)

N

Video Memory Range: 16 MB to 1024 MB

Note: Minimum 128 MB required for 3D acceleration

Enter video memory in MB: [128] (128 MB recommended for best compatibility)

256

Available Graphics Controllers:

1. VMSVGA (Recommended - Best compatibility)

2. GpuSVGA (3D acceleration support, min 128 MB VRAM)

3. VBoxVGA (Legacy)

Select graphics controller (1-3): [1] (VMSVGA recommended)

1

==================== HARD DISK ===================

[INFO] VM already exists - disk configuration will be skipped.

To modify disks, use VirtualBox GUI or VBoxManage storageattach command.

Available USB controllers:

1. USB 1.1 (OHCI)

2. USB 2.0 (EHCI)

3. USB 3.0 (xHCI)

Select a USB controller (1-3): [3] (USB 3.0 recommended for webcams and modern devices)

3

Available network card models:

1. Intel PRO/1000 MT Desktop (Recommended)

2. Intel PRO/1000 T Server

3. Intel PRO/1000 MT Server

4. VirtIO

Select a network card model (1-4): [1] (Intel PRO/1000 MT Desktop has best compatibility)

1

==================== ENHANCED NETWORK CONFIGURATION ===================

Configure advanced network settings? (Y/N) [Y] (Device ID, DHCP, DNS spoofing)

Y

========== ETHERNET CONFIGURATION ==========

Available Network Cards:

1. Intel PRO/1000 MT Desktop

2. Intel PRO/1000 T Server

3. Intel PRO/1000 MT Server

4. Intel 82574L Gigabit

5. Intel I217-LM Gigabit

6. Intel I219-V Gigabit

7. Realtek RTL8111/8168

8. Realtek RTL8125 2.5GbE

Select Network Card (1-8): [1] (Intel PRO/1000 MT is most compatible)

1

[OK] Network Card: Intel PRO/1000 MT Desktop

[INFO] Storing PCI Device ID configuration (will apply after creation)...

========== MAC ADDRESS CONFIGURATION ==========

Select MAC Address Vendor (for realistic OUI):

1. Intel

2. Realtek

3. Dell

4. HP

5. Lenovo

6. ASUS

7. Gigabyte

8. MSI

Select MAC Vendor (1-8): [1] (Intel is most common for built-in NICs)

1

[OK] Generated MAC: 3C:97:0E:F0:95:4F (Intel)

========== DHCP CONFIGURATION ==========

Network Connection Mode:

1. NAT (Recommended - shares host IP, good for internet)

2. Bridged Adapter (Gets own IP from your router)

3. Internal Network (Isolated VM network)

4. Host-Only Adapter (Talk to host only)

5. NAT Network (Multiple VMs share NAT)

Select Network Mode (1-5): [1] (NAT is simplest and most secure)

1

[OK] Network Mode: NAT

========== DNS CONFIGURATION ==========

Configure custom DNS settings? (Y/N) [Y] (Use custom DNS servers)

n

DNS Suffix (Domain name for the VM):

Enter DNS Suffix: [localdomain] (e.g., home.local, company.com)

google.com

[INFO] DNS Suffix 'google.com' should be configured inside Windows

========== NETWORK ANTI-DETECTION ==========

[OK] Network anti-detection settings recorded

========== NETWORK CONFIGURATION SUMMARY ==========

Network Card: Intel PRO/1000 MT Desktop

PCI IDs: 8086:100E

MAC Address: 3C:97:0E:F0:95:4F (Intel)

Network Mode: NAT

====================================================

==================== AUDIO CONFIGURATION ===================

Available Host Audio Drivers:

1. Windows Audio Session (WASAPI) - Recommended for Windows 10/11

2. Windows DirectSound - Legacy Windows

3. Null Audio - No audio

4. Default - Let VirtualBox decide

Select host audio driver (1-4): [1] (WASAPI recommended)

1

Available Audio Controllers:

1. Intel HD Audio (Recommended)

2. ICH AC97

3. SoundBlaster 16

Select audio controller (1-3): [1] (Intel HD Audio recommended)

1

Enable audio output? (Y/N) [Y] (Allow sound from VM)

y

Enable audio input (microphone)? (Y/N) [Y] (Allow microphone in VM)

y

==================== CLIPBOARD & DRAG-AND-DROP ===================

[INFO] Clipboard and drag-and-drop allow copy/paste between host and VM.

[WARNING] These features can increase VM detection!

[INFO] They require Guest Additions to work.

Available Shared Clipboard modes:

1. Disabled (Recommended for anti-detection)

2. Host To Guest (Copy from host → paste in VM)

3. Guest To Host (Copy from VM → paste in host)

4. Bidirectional (Copy/paste both ways)

Select clipboard mode (1-4): [1] (Disabled recommended)

1

Available Drag-and-Drop modes:

1. Disabled (Recommended for anti-detection)

2. Host To Guest (Drag files from host → VM)

3. Guest To Host (Drag files from VM → host)

4. Bidirectional (Drag files both ways)

Select drag-and-drop mode (1-4): [1] (Disabled recommended)

1

[OK] Clipboard and drag-and-drop disabled (good for anti-detection).

================== ADVANCED CONFIGURATION =================

Apply advanced anti-detection settings? (Y/N) [Y] (Recommended for maximum concealment)

y

Available hardware vendor profiles:

1. MSI

2. ASUS

3. Gigabyte

4. ASRock

Select a hardware vendor profile (1-4): [1] (MSI has good detection evasion)

1

Available storage device profiles:

1. Samsung SSD 980 EVO

2. Samsung SSD 870 EVO

3. Western Digital Blue SN570 NVMe

4. Crucial MX500

Select a storage device profile (1-4): [1] (Samsung SSDs are common and realistic)

1

[INFO] Validating configuration for conflicts...

========== VALIDATION SUMMARY ==========

Conflicts Fixed: 0

No remaining conflicts! Configuration looks good.

========================================

[INFO] VM 'w10' already exists. Applying configuration changes...

[INFO] Starting VM configuration for 'w10'...

[INFO] Applying base configuration...

[OK] Base configuration applied.

[INFO] Configuring USB controller...

[OK] USB controller configured.

[INFO] Setting network adapter type...

[OK] Network adapter type set to Intel PRO/1000 MT Desktop

[INFO] Applying advanced network settings...

[OK] PCI Device IDs applied.

[OK] Advanced network settings applied.

[INFO] Configuring audio...

[OK] Audio configured (Controller: hda, Driver: was)

[INFO] Applying CPU configuration...

CPU Model: AMD Ryzen 7 1800X

[INFO] Attempting VirtualBox CPU profile: AMD Ryzen 7 1800X Eight-Core

[OK] CPU profile applied!

[INFO] Setting CPU vendor string...

[INFO] Setting CPUID leaf 1...

[INFO] Setting CPU brand string...

[INFO] Setting DMI processor info...

[OK] CPU configuration complete!

Vendor: AMD

Model: AMD Ryzen 7 1800X Eight-Core Processor

Socket: AM4

[INFO] Applying advanced CPU timing and features...

[OK] CPU configuration complete!

[INFO] Removing VirtualBox ACPI signatures...

[OK] ACPI signatures spoofed.

[INFO] Applying SMBIOS (DMI) spoofing...

[OK] DMI/SMBIOS motherboard info spoofed.

Board Serial: 5VWQ2A69WQCX

System Serial: V00E16PF81

System UUID: 05d8f349-a0a3-467d-89fb-979f1950ae13

[INFO] Applying storage device spoofing...

[OK] Hard disk spoofing applied.

[INFO] Applying optical drive spoofing...

[OK] Optical drive spoofing applied.

HDD: Samsung SSD 980 EVO

DVD: HL-DT-ST DVDRAM GH24NSC0

[INFO] Applying RAM module spoofing...

Available RAM profiles:

1. Corsair Vengeance LPX 16GB

2. G.Skill Ripjaws V 32GB

3. Kingston Fury Beast 16GB

4. Samsung DDR4 32GB

Select a RAM profile (1-4): [1] (Realistic RAM module configuration)

1

[OK] Selected: Corsair Vengeance LPX 16GB

[OK] RAM Slot 0: Corsair CMK16GX4M2B3200C16 (8192 MB)

[OK] RAM Slot 1: Corsair CMK16GX4M2B3200C16 (8192 MB)

[OK] RAM module spoofing applied.

[INFO] Configuring time synchronization controls...

[OK] Time synchronization controls modified.

[INFO] Configuring console output and boot display...

[OK] Console and boot display configured.

==================== PORT CONNECTOR EMULATION ===================

Configure Port Connector Emulation? (Y/N) [Y] (Adds realistic port information to DMI)

y

[INFO] Configuring port connectors for realistic DMI data...

[OK] Port 0: USB 3.2 Gen 1 Type-A

[OK] Port 1: USB 3.2 Gen 1 Type-A

[OK] Port 2: USB 3.2 Gen 2 Type-C

[OK] Port 3: USB 2.0 Type-A

[OK] Port 4: USB 2.0 Type-A

[OK] Port 5: HD Audio Line Out

[OK] Port 6: HD Audio Mic In

[OK] Port 7: Ethernet RJ-45

[OK] Port 8: SATA 6Gb/s

[OK] Port 9: SATA 6Gb/s

[OK] Port 10: HDMI

[OK] Port 11: DisplayPort

[OK] Port Connector Emulation configured with 12 ports!

[INFO] These ports will appear in system information tools (dmidecode, etc.)

==================== MISC HARDWARE EMULATION ===================

Configure Misc Hardware Emulation? (Y/N) [Y] (Adds realistic keyboard, mouse, ACPI, AHCI, OHCI info)

y

========== KEYBOARD/MOUSE CONFIGURATION ==========

Available Keyboard Vendors:

1. Logitech

2. Microsoft

3. Dell

4. HP

5. Razer

Select Keyboard Vendor (1-5): [1] (Logitech is most common)

1

Available Logitech Keyboard Models:

1. K120

2. K270

3. K380

4. G Pro

5. G915

Select Keyboard Model (1-5): [1] (Select your preferred model)

1

[OK] Keyboard: Logitech K120

Available Mouse Vendors:

1. Logitech

2. Microsoft

3. Dell

4. HP

5. Razer

Select Mouse Vendor (1-5): [1] (Logitech is most common)

1

Available Logitech Mouse Models:

1. M185

2. M510

3. G502 HERO

4. G Pro X

5. MX Master 3

Select Mouse Model (1-5): [1] (Select your preferred model)

1

[OK] Mouse: Logitech M185

[OK] Keyboard/Mouse emulation configured.

========== POWER CONFIGURATION ==========

Platform Type:

1. Desktop (No battery - Standard configuration)

2. Laptop (Note: VirtualBox cannot emulate battery hardware)

Select Platform (1-2): [1] (Desktop is standard)

1

[OK] Platform: Desktop (AC Power Only)

========== ACPI CONTROLLER CONFIGURATION ==========

Available ACPI Vendors:

1. Intel

2. AMD

3. ASUSTeK

4. MSI

5. Gigabyte

Select ACPI Vendor (1-5): [2] (Match your CPU vendor for consistency)

2

Available AMD ACPI Models:

1. FCH

2. Promontory

3. X570

4. B550

5. B650

Select ACPI Model (1-5): [1] (Select chipset generation)

1

[OK] ACPI: AMD FCH

========== AHCI CONTROLLER CONFIGURATION ==========

Available AHCI Vendors:

1. Intel

2. AMD

3. ASMedia

Select AHCI Vendor (1-3): [2] (Match your CPU vendor)

2

Available AMD AHCI Models:

1. FCH SATA Controller [AHCI mode]

2. 400 Series Chipset SATA Controller

3. 500 Series Chipset SATA Controller

4. 600 Series Chipset SATA Controller

Select AHCI Model (1-4): [1] (Select chipset SATA controller)

1

[OK] AHCI: AMD FCH SATA Controller [AHCI mode]

========== OHCI CONTROLLER CONFIGURATION ==========

Available OHCI Vendors:

1. Intel

2. AMD

3. VIA

4. NEC

Select OHCI Vendor (1-4): [2] (Match your CPU vendor)

2

Available AMD OHCI Models:

1. FCH USB OHCI Controller

2. SB7x0/SB8x0 USB OHCI Controller

Select OHCI Model (1-2): [1] (Select USB controller)

1

[OK] OHCI: AMD FCH USB OHCI Controller

[OK] EHCI/XHCI also configured to match.

========== MISC HARDWARE SUMMARY ==========

Keyboard: Logitech K120

Mouse: Logitech M185

Platform: Desktop (no battery)

ACPI: AMD FCH

AHCI: AMD FCH SATA Controller [AHCI mode]

OHCI: AMD FCH USB OHCI Controller

============================================

[OK] Misc Hardware Emulation configured!

[INFO] Applying extra anti-detection flags...

[OK] Additional anti-detection fixes applied.

[OK] Extra flags applied.

[INFO] Verifying configuration...

[OK] All critical settings verified.

Create a snapshot of this VM configuration? (Y/N) [Y] (Recommended to preserve this state)

y

Enter snapshot name: [CloakBox-Configured-2026-06-03] (Descriptive name for this snapshot)

old

[INFO] Creating snapshot 'old'...

0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Snapshot taken. UUID: 0c1ceac9-f4d5-4f16-8dfc-f5570eb4253f

[OK] Snapshot created successfully.

==================== PS/2 MOUSE FIX ===================

[INFO] Applying PS/2 Mouse fix for detection evasion...

Checking for running VirtualBox processes...
Stopping VBoxSVC.exe process...
VBoxSVC.exe terminated.
Stopping other VirtualBox-related processes...
Stopping VBoxSDS...
All VirtualBox processes have been terminated.

[OK] Found: C:\Users\brunobarbosa\VirtualBox VMs\w10\w10.vbox

[INFO] Inserting missing HID tag...

[OK] Mouse fix applied successfully!

True

Export configuration summary to file? (Y/N) [Y] (Save settings for reference)

y

[OK] Configuration saved to: C:\Users\brunobarbosa\Desktop\CloakBox-w10-Config-2026-06-03-1725.txt

 # ================== IMPORTANT NEXT STEP ==================

VERIFY ANTI-DETECTION: Use tools like Pafish or Al-Khaser or my Powershell to test VM detection.

   # ==========================================================

Start the VM now? (Y/N) [N] (Launch VM after configuration)

n

Script execution complete. Press any key to exit...

Press Enter to continue...:
┏[ 06/03/2026 @ 5:25:33 PM -03][ brunobarbosa ::  DESKTOP-IPE670N][ RAM: 16/31GB][ 9:26.737s]
┣[ ~\Desktop\Bruno\codigos\CloakBox-main]
└─[#]> .\RUN-OUTSIDE-VM.ps1
Successfully running with Administrator privileges.
Checking for running VirtualBox processes...
Stopping VBoxSVC.exe process...
VBoxSVC.exe terminated.
Stopping VirtualBox.exe process...
VirtualBox.exe terminated.
Stopping other VirtualBox-related processes...
Stopping VBoxSDS...
All VirtualBox processes have been terminated.

###################################################

BYPASS PROCTORING WITH CLOAKBOX

###################################################

This tool will help you configure your Cloakbox VM to avoid detection.

Default values are shown in [brackets].

[INFO] Detecting system hardware...

[WARNING] Hardware detection failed. Using defaults.

[WARNING] Could not auto-detect hardware. Please enter manually.

CPU Cores (e.g. 4, 8):: 8

RAM in GB (e.g. 16, 32):: 32

Free Storage in GB (e.g. 100):: 200

CPU Type (Intel/AMD):: AMD

==================== SYSTEM INFO (MANUAL) ================

CPU: AMD (8 cores)

RAM: 32 GB

Storage: 200 GB free

==========================================================

================ RECOMMENDED VM SETTINGS ================

CPU Cores: 4 cores (VM will use ~50% of your CPU)

RAM: 16 GB = 16384 MB (VM will use ~50% of your RAM)

Storage: 60 GB (Leaves space for host OS)

CPU Profile: AMD Ryzen 7 1800X

==========================================================

[TIP] These defaults allocate ~50% of your resources to the VM.

You can customize these in the next steps.

Enter the path to your Cloakbox/VirtualBox installation: [C:\Program Files\Vektor T13\VirtualBox] (e.g. C:\Program Files\Vektor T13\VirtualBox)

C:\Program Files\Oracle\VirtualBox

[INFO] Detected VirtualBox version: 7.2.8r173730

==================== MAIN MENU ===================

1. Create or Modify a VM

2. Delete a VM

3. Exit

Select an option (1-3): [1] (Choose what you want to do)

1

Available VMs on this system (May take a few seconds):

[TIP] Type a NEW name to create a VM, or an EXISTING name to modify it.

Enter the VM Name: w10

[INFO] VM 'w10' does not exist. Will create new VM.

==================== UNATTENDED INSTALLATION ===================

[INFO] Unattended installation automates Windows setup (no manual clicking).

[WARNING] If it fails, just install Windows manually instead.

Configure unattended (automatic) Windows installation? (Y/N) [Y] (Automatically install Windows without manual intervention)

y

========== STEP 1: SELECT WINDOWS ISO ==========

[INFO] Select Windows ISO file...

[OK] Selected ISO: C:\Users\brunobarbosa\Downloads\Windows.iso

========== STEP 2: WINDOWS EDITION ==========

[INFO] Analyzing ISO: Windows

[WARNING] Could not auto-detect Windows version from filename

[INFO] Please select manually

Available Windows Editions:

1. Windows 11 Pro

2. Windows 11 Home

3. Windows 10 Pro

4. Windows 10 Home

Select Windows Edition (1-4): [1] (Must match your ISO)

1

[OK] Selected: Windows 11 Pro

========== STEP 3: USERNAME AND PASSWORD ==========

Enter Windows username: [User] (This will be your Windows account name)

rag

Enter Windows password: (typing is hidden)

[TIP] VirtualBox unattended install requires a password.

[TIP] Use a simple temporary password, you can change it after installation.

[TIP] Suggested: ChangeMe123!

[WARNING] No password entered!

[INFO] A temporary password 'ChangeMe123!' will be used.

[INFO] You can change it after Windows installs.

Continue with temporary password? (Y/N) [Y] (You can change it later)

y

[OK] Username: rag

[OK] Password: (none)

========== STEP 4: PRODUCT KEY (OPTIONAL) ==========

Do you have a Windows product key? (Y/N) [N] (Skip to activate later)

n

[INFO] Skipping product key - Windows will run unactivated.

========== STEP 5: HOSTNAME ==========

Enter computer hostname: [w10] (Computer name shown in Windows)

wag

[INFO] Added .local suffix: wag.local

[OK] Hostname: wag.local

========== STEP 6: DOMAIN (OPTIONAL) ==========

Join a Windows domain? (Y/N) [N] (Most users should skip this)

n

[INFO] Skipping domain - will use WORKGROUP.

========== STEP 6.5: LOCALE AND TIMEZONE ==========

Available Time Zones:

1. UTC

2. America/New_York (EST/EDT)

3. America/Chicago (CST/CDT)

4. America/Los_Angeles (PST/PDT)

5. Europe/London (GMT/BST)

6. Europe/Paris (CET/CEST)

Select time zone (1-6): [1] (UTC is most compatible)

1

[OK] Time zone: UTC

========== STEP 7: INSTALL IN BACKGROUND ==========

[INFO] Background install runs the VM headless (no window).

[INFO] You won't see the installation progress.

Install in background? (Y/N) [N] (Recommended: N (so you can see progress))

n

[OK] VM window will show during installation.

========== STEP 8: GUEST ADDITIONS ==========

[WARNING] Guest Additions increases VM detection!

Proctoring software can easily detect:

- VBoxGuest.sys driver

- VBoxService.exe process

- VirtualBox registry keys

Install VirtualBox Guest Additions automatically? (Y/N) [N] (NOT recommended for anti-detection)

n

[OK] Guest Additions will NOT be installed (good for anti-detection).

========== UNATTENDED INSTALL SUMMARY ==========

ISO: C:\Users\brunobarbosa\Downloads\Windows.iso

Edition: Windows 11 Pro

Username: rag

Password: (none)

Product Key: (none - unactivated)

Hostname: wag.local

Domain: (none - WORKGROUP)

Background Install: No

Guest Additions: No (stealthy)

================================================

Proceed with these settings? (Y/N) [Y] (Confirm unattended install configuration)

y

[OK] Unattended installation configured.

==================== OPERATING SYSTEM ====================

[INFO] Using OS type from unattended install configuration

[OK] OS Type: Windows 11 (64-bit)

==================== HARDWARE ===================

Base Memory Range: 1024 MB (1 GB) to 30720 MB (30 GB)

Enter memory size in MB: [16384] (Recommended: 16384 MB = 16 GB)

16384

Processors Range: 1 to 8 cores available

Enter number of CPU cores: [4] (Recommended: 4 cores (~50% of your system))

4

Available CPU models:

[INFO] Will try VirtualBox built-in profiles first, fallback to manual CPUID if needed

1. Intel Core i7-6700K

2. Intel Core i7-9700K

3. Intel Core i7-3960X

4. Intel Core i9-9900K

5. AMD Ryzen 7 1800X (RECOMMENDED)

6. Intel Core i7-7700K

Select a CPU model (1-6): [5] (Recommended based on your CPU type)

5

[OK] Selected: AMD Ryzen 7 1800X

Available Chipsets:

1. ICH9 (Recommended - Modern, supports PCIe)

2. PIIX3 (Legacy - Better compatibility with older OSes)

Select Chipset (1-2): [1] (ICH9 recommended for Windows 10/11)

1

Available TPM (Trusted Platform Module) options:

1. None (Good for anti-detection)

2. TPM v1.2

3. TPM v2.0 (Required for Windows 11)

[DETECTED] Windows 11 selected - TPM 2.0 is REQUIRED!

Select TPM version (1-3): [3] (TPM 2.0 required for Windows 11)

3

Available Pointing Devices:

1. PS/2 Mouse (Recommended for anti-detection)

2. USB Tablet

3. USB Multi-Touch Tablet

4. USB Multi-Touch Touchscreen and TouchPad

Select pointing device (1-4): [1] (PS/2 Mouse recommended)

1

Enable I/O APIC? (Y/N) [Y] (Required for multi-core CPUs and 64-bit guests)

y

Enable PAE/NX? (Y/N) [Y] (Physical Address Extension - Required for 64-bit guests)

y

Enable Nested VT-x/AMD-V? (Y/N) [Y] (Allows running VMs inside the VM (may increase detection))

y

Available Paravirtualization Interfaces:

1. None (No paravirtualization)

2. Default (Let VirtualBox decide)

3. Legacy (Recommended for anti-detection)

4. Minimal (Minimal paravirtualization)

5. Hyper-V (Windows-optimized)

6. KVM (Linux-optimized)

Select Paravirtualization Interface (1-6): [3] (Legacy recommended for hiding VM)

3

Enable Nested Paging? (Y/N) [Y] (Hardware virtualization feature for better performance)

y

Enable hardware clock in UTC time? (Y/N) [N] (Useful for dual-boot systems)

n

[DETECTED] Windows 11 selected - UEFI firmware is REQUIRED!

Enable UEFI (EFI) firmware? (Y/N) [Y] (Required for Windows 11)

n

[General Feedback]
The most similar commands are:
➤ Get-WmiObject

┏[ 06/03/2026 @ 5:50:20 PM -03][ brunobarbosa ::  DESKTOP-IPE670N][ RAM: 13/31GB][ 2:9.61s]
┣[ ~\Desktop\Bruno\codigos\CloakBox-main]
└─[#][ Error, check your command]> .\RUN-OUTSIDE-VM.ps1
Successfully running with Administrator privileges.
Checking for running VirtualBox processes...
All VirtualBox processes have been terminated.

###################################################

BYPASS PROCTORING WITH CLOAKBOX

###################################################

This tool will help you configure your Cloakbox VM to avoid detection.

Default values are shown in [brackets].

[INFO] Detecting system hardware...

[WARNING] Hardware detection failed. Using defaults.

[WARNING] Could not auto-detect hardware. Please enter manually.

CPU Cores (e.g. 4, 8):: 8

RAM in GB (e.g. 16, 32):: 32

Free Storage in GB (e.g. 100):: 200

CPU Type (Intel/AMD):: AMD

==================== SYSTEM INFO (MANUAL) ================

CPU: AMD (8 cores)

RAM: 32 GB

Storage: 200 GB free

==========================================================

================ RECOMMENDED VM SETTINGS ================

CPU Cores: 4 cores (VM will use ~50% of your CPU)

RAM: 16 GB = 16384 MB (VM will use ~50% of your RAM)

Storage: 60 GB (Leaves space for host OS)

CPU Profile: AMD Ryzen 7 1800X

==========================================================

[TIP] These defaults allocate ~50% of your resources to the VM.

You can customize these in the next steps.

Enter the path to your Cloakbox/VirtualBox installation: [C:\Program Files\Vektor T13\VirtualBox] (e.g. C:\Program Files\Vektor T13\VirtualBox)

C:\Program Files\Oracle\VirtualBox

[INFO] Detected VirtualBox version: 7.2.8r173730

==================== MAIN MENU ===================

1. Create or Modify a VM

2. Delete a VM

3. Exit

Select an option (1-3): [1] (Choose what you want to do)

1

Available VMs on this system (May take a few seconds):

[TIP] Type a NEW name to create a VM, or an EXISTING name to modify it.

Enter the VM Name: w10

[INFO] VM 'w10' does not exist. Will create new VM.

==================== UNATTENDED INSTALLATION ===================

[INFO] Unattended installation automates Windows setup (no manual clicking).

[WARNING] If it fails, just install Windows manually instead.

Configure unattended (automatic) Windows installation? (Y/N) [Y] (Automatically install Windows without manual intervention)

y

========== STEP 1: SELECT WINDOWS ISO ==========

[INFO] Select Windows ISO file...

[OK] Selected ISO: C:\Users\brunobarbosa\Downloads\Windows.iso

========== STEP 2: WINDOWS EDITION ==========

[INFO] Analyzing ISO: Windows

[WARNING] Could not auto-detect Windows version from filename

[INFO] Please select manually

Available Windows Editions:

1. Windows 11 Pro

2. Windows 11 Home

3. Windows 10 Pro

4. Windows 10 Home

Select Windows Edition (1-4): [1] (Must match your ISO)

3

[OK] Selected: Windows 10 Pro

========== STEP 3: USERNAME AND PASSWORD ==========

Enter Windows username: [User] (This will be your Windows account name)

14wag

Enter Windows password: (typing is hidden)

[TIP] VirtualBox unattended install requires a password.

[TIP] Use a simple temporary password, you can change it after installation.

[TIP] Suggested: ChangeMe123!

[WARNING] No password entered!

[INFO] A temporary password 'ChangeMe123!' will be used.

[INFO] You can change it after Windows installs.

Continue with temporary password? (Y/N) [Y] (You can change it later)

y

[OK] Username: 14wag

[OK] Password: (none)

========== STEP 4: PRODUCT KEY (OPTIONAL) ==========

Do you have a Windows product key? (Y/N) [N] (Skip to activate later)

n

[INFO] Skipping product key - Windows will run unactivated.

========== STEP 5: HOSTNAME ==========

Enter computer hostname: [w10] (Computer name shown in Windows)

wag

[INFO] Added .local suffix: wag.local

[OK] Hostname: wag.local

========== STEP 6: DOMAIN (OPTIONAL) ==========

Join a Windows domain? (Y/N) [N] (Most users should skip this)

n

[INFO] Skipping domain - will use WORKGROUP.

========== STEP 6.5: LOCALE AND TIMEZONE ==========

Available Time Zones:

1. UTC

2. America/New_York (EST/EDT)

3. America/Chicago (CST/CDT)

4. America/Los_Angeles (PST/PDT)

5. Europe/London (GMT/BST)

6. Europe/Paris (CET/CEST)

Select time zone (1-6): [1] (UTC is most compatible)

1

[OK] Time zone: UTC

========== STEP 7: INSTALL IN BACKGROUND ==========

[INFO] Background install runs the VM headless (no window).

[INFO] You won't see the installation progress.

Install in background? (Y/N) [N] (Recommended: N (so you can see progress))

n

[OK] VM window will show during installation.

========== STEP 8: GUEST ADDITIONS ==========

[WARNING] Guest Additions increases VM detection!

Proctoring software can easily detect:

- VBoxGuest.sys driver

- VBoxService.exe process

- VirtualBox registry keys

Install VirtualBox Guest Additions automatically? (Y/N) [N] (NOT recommended for anti-detection)

n

[OK] Guest Additions will NOT be installed (good for anti-detection).

========== UNATTENDED INSTALL SUMMARY ==========

ISO: C:\Users\brunobarbosa\Downloads\Windows.iso

Edition: Windows 10 Pro

Username: 14wag

Password: (none)

Product Key: (none - unactivated)

Hostname: wag.local

Domain: (none - WORKGROUP)

Background Install: No

Guest Additions: No (stealthy)

================================================

Proceed with these settings? (Y/N) [Y] (Confirm unattended install configuration)

y

[OK] Unattended installation configured.

==================== OPERATING SYSTEM ====================

[INFO] Using OS type from unattended install configuration

[OK] OS Type: Windows 10 (64-bit)

==================== HARDWARE ===================

Base Memory Range: 1024 MB (1 GB) to 30720 MB (30 GB)

Enter memory size in MB: [16384] (Recommended: 16384 MB = 16 GB)

16384

Processors Range: 1 to 8 cores available

Enter number of CPU cores: [4] (Recommended: 4 cores (~50% of your system))

4

Available CPU models:

[INFO] Will try VirtualBox built-in profiles first, fallback to manual CPUID if needed

1. Intel Core i7-6700K

2. Intel Core i7-9700K

3. Intel Core i7-3960X

4. Intel Core i9-9900K

5. AMD Ryzen 7 1800X (RECOMMENDED)

6. Intel Core i7-7700K

Select a CPU model (1-6): [5] (Recommended based on your CPU type)

5

[OK] Selected: AMD Ryzen 7 1800X

Available Chipsets:

1. ICH9 (Recommended - Modern, supports PCIe)

2. PIIX3 (Legacy - Better compatibility with older OSes)

Select Chipset (1-2): [1] (ICH9 recommended for Windows 10/11)

1

Available TPM (Trusted Platform Module) options:

1. None (Good for anti-detection)

2. TPM v1.2

3. TPM v2.0 (Required for Windows 11)

[INFO] Windows 10 detected - TPM not required (better for anti-detection)

Select TPM version (1-3): [1] (None recommended for stealth)

1

Available Pointing Devices:

1. PS/2 Mouse (Recommended for anti-detection)

2. USB Tablet

3. USB Multi-Touch Tablet

4. USB Multi-Touch Touchscreen and TouchPad

Select pointing device (1-4): [1] (PS/2 Mouse recommended)

1

Enable I/O APIC? (Y/N) [Y] (Required for multi-core CPUs and 64-bit guests)

y

Enable PAE/NX? (Y/N) [Y] (Physical Address Extension - Required for 64-bit guests)

y

Enable Nested VT-x/AMD-V? (Y/N) [Y] (Allows running VMs inside the VM (may increase detection))

y

Available Paravirtualization Interfaces:

1. None (No paravirtualization)

2. Default (Let VirtualBox decide)

3. Legacy (Recommended for anti-detection)

4. Minimal (Minimal paravirtualization)

5. Hyper-V (Windows-optimized)

6. KVM (Linux-optimized)

Select Paravirtualization Interface (1-6): [3] (Legacy recommended for hiding VM)

3

Enable Nested Paging? (Y/N) [Y] (Hardware virtualization feature for better performance)

y

Enable hardware clock in UTC time? (Y/N) [N] (Useful for dual-boot systems)

n

[INFO] Windows 10 detected - BIOS mode is better for anti-detection

Enable UEFI (EFI) firmware? (Y/N) [N] (BIOS mode harder to detect)

n

Video Memory Range: 16 MB to 1024 MB

Note: Minimum 128 MB required for 3D acceleration

Enter video memory in MB: [128] (128 MB recommended for best compatibility)

256

Available Graphics Controllers:

1. VMSVGA (Recommended - Best compatibility)

2. GpuSVGA (3D acceleration support, min 128 MB VRAM)

3. VBoxVGA (Legacy)

Select graphics controller (1-3): [1] (VMSVGA recommended)

1

==================== HARD DISK ===================

Hard Disk Options:

1. Create a Virtual Hard Disk Now (Recommended)

2. Use an Existing Virtual Hard Disk File

3. Do Not Add a Virtual Hard Disk

Select hard disk option (1-3): [1] (Option 1 creates a new virtual disk)

1

========== HARD DISK FILE LOCATION AND SIZE ==========

Default location: C:\Users\brunobarbosa\VirtualBox VMs\w10\w10.vdi

Use custom disk location? (Y/N) [N] (Default location is usually fine)

n

Disk Size Range: 4.00 MB to 2.00 TB

Enter VM storage size in GB: [60] (Recommended: 60 GB)

128

========== HARD DISK FILE TYPE AND VARIANT ==========

Available disk formats:

1. VDI (VirtualBox Disk Image) (Recommended)

2. VMDK (Virtual Machine Disk)

3. VHD (Virtual Hard Disk)

Select disk format (1-3): [1] (VDI is native VirtualBox format)

1

Available disk variants:

1. Dynamically allocated (Recommended - grows as needed)

2. Fixed size (Pre-allocate Full Size - faster but uses full space immediately)

Select disk variant (1-2): [1] (Dynamic allocation saves space)

1

[INFO] Dynamic disk will grow up to 128 GB as needed.

Disk Performance Options:

Mark as Solid-State Drive (SSD)? (Y/N) [Y] (Better performance characteristics)

y

Enable hot-pluggable? (Y/N) [N] (Allows disk to be attached/detached while running)

n

Available USB controllers:

1. USB 1.1 (OHCI)

2. USB 2.0 (EHCI)

3. USB 3.0 (xHCI)

Select a USB controller (1-3): [3] (USB 3.0 recommended for webcams and modern devices)

3

Available network card models:

1. Intel PRO/1000 MT Desktop (Recommended)

2. Intel PRO/1000 T Server

3. Intel PRO/1000 MT Server

4. VirtIO

Select a network card model (1-4): [1] (Intel PRO/1000 MT Desktop has best compatibility)

1

==================== ENHANCED NETWORK CONFIGURATION ===================

Configure advanced network settings? (Y/N) [Y] (Device ID, DHCP, DNS spoofing)

1

Configure advanced network settings? (Y/N) [Y] (Device ID, DHCP, DNS spoofing)

y

========== ETHERNET CONFIGURATION ==========

Available Network Cards:

1. Intel PRO/1000 MT Desktop

2. Intel PRO/1000 T Server

3. Intel PRO/1000 MT Server

4. Intel 82574L Gigabit

5. Intel I217-LM Gigabit

6. Intel I219-V Gigabit

7. Realtek RTL8111/8168

8. Realtek RTL8125 2.5GbE

Select Network Card (1-8): [1] (Intel PRO/1000 MT is most compatible)

1

[OK] Network Card: Intel PRO/1000 MT Desktop

[INFO] Storing PCI Device ID configuration (will apply after creation)...

========== MAC ADDRESS CONFIGURATION ==========

Select MAC Address Vendor (for realistic OUI):

1. Intel

2. Realtek

3. Dell

4. HP

5. Lenovo

6. ASUS

7. Gigabyte

8. MSI

Select MAC Vendor (1-8): [1] (Intel is most common for built-in NICs)

1

[OK] Generated MAC: 3C:97:0E:B4:2A:13 (Intel)

========== DHCP CONFIGURATION ==========

Network Connection Mode:

1. NAT (Recommended - shares host IP, good for internet)

2. Bridged Adapter (Gets own IP from your router)

3. Internal Network (Isolated VM network)

4. Host-Only Adapter (Talk to host only)

5. NAT Network (Multiple VMs share NAT)

Select Network Mode (1-5): [1] (NAT is simplest and most secure)

1

[OK] Network Mode: NAT

========== DNS CONFIGURATION ==========

Configure custom DNS settings? (Y/N) [Y] (Use custom DNS servers)

y

Available DNS Options:

1. Use Host DNS - Pass through host DNS settings

2. Google DNS - Fast and reliable

3. Cloudflare DNS - Privacy-focused

4. OpenDNS - Security features

5. Quad9 - Malware blocking

6. Custom - Enter your own DNS servers

Select DNS Option (1-6): [1] (Host DNS is simplest)

1

[OK] Using Host DNS resolver

DNS Suffix (Domain name for the VM):

Enter DNS Suffix: [localdomain] (e.g., home.local, company.com)

[INFO] DNS Suffix 'localdomain' should be configured inside Windows

========== NETWORK ANTI-DETECTION ==========

[OK] Network anti-detection settings recorded

========== NETWORK CONFIGURATION SUMMARY ==========

Network Card: Intel PRO/1000 MT Desktop

PCI IDs: 8086:100E

MAC Address: 3C:97:0E:B4:2A:13 (Intel)

Network Mode: NAT

====================================================

==================== AUDIO CONFIGURATION ===================

Available Host Audio Drivers:

1. Windows Audio Session (WASAPI) - Recommended for Windows 10/11

2. Windows DirectSound - Legacy Windows

3. Null Audio - No audio

4. Default - Let VirtualBox decide

Select host audio driver (1-4): [1] (WASAPI recommended)

1

Available Audio Controllers:

1. Intel HD Audio (Recommended)

2. ICH AC97

3. SoundBlaster 16

Select audio controller (1-3): [1] (Intel HD Audio recommended)

1

Enable audio output? (Y/N) [Y] (Allow sound from VM)

y

Enable audio input (microphone)? (Y/N) [Y] (Allow microphone in VM)

y

==================== CLIPBOARD & DRAG-AND-DROP ===================

[INFO] Clipboard and drag-and-drop allow copy/paste between host and VM.

[WARNING] These features can increase VM detection!

[INFO] They require Guest Additions to work.

Available Shared Clipboard modes:

1. Disabled (Recommended for anti-detection)

2. Host To Guest (Copy from host → paste in VM)

3. Guest To Host (Copy from VM → paste in host)

4. Bidirectional (Copy/paste both ways)

Select clipboard mode (1-4): [1] (Disabled recommended)

1

Available Drag-and-Drop modes:

1. Disabled (Recommended for anti-detection)

2. Host To Guest (Drag files from host → VM)

3. Guest To Host (Drag files from VM → host)

4. Bidirectional (Drag files both ways)

Select drag-and-drop mode (1-4): [1] (Disabled recommended)

1

[OK] Clipboard and drag-and-drop disabled (good for anti-detection).

================== ADVANCED CONFIGURATION =================

Apply advanced anti-detection settings? (Y/N) [Y] (Recommended for maximum concealment)

y

Available hardware vendor profiles:

1. MSI

2. ASUS

3. Gigabyte

4. ASRock

Select a hardware vendor profile (1-4): [1] (MSI has good detection evasion)

1

Available storage device profiles:

1. Samsung SSD 980 EVO

2. Samsung SSD 870 EVO

3. Western Digital Blue SN570 NVMe

4. Crucial MX500

Select a storage device profile (1-4): [1] (Samsung SSDs are common and realistic)

1

[INFO] Validating configuration for conflicts...

[WARNING] Nested VT-x may increase VM detection!

Some proctoring software detects nested virtualization.

Disable Nested VT-x for better anti-detection? (Y/N) [N] (Only if you don't need nested VMs)

n

========== VALIDATION SUMMARY ==========

Conflicts Fixed: 0

1 Warning(s) remaining

(May cause performance or compatibility issues)

========================================

[INFO] Creating new VM 'w10'...

Virtual machine 'w10' is created and registered.
UUID: 8542cf3c-b63b-4d9c-931b-ebe57b723292
Settings file: 'C:\Users\brunobarbosa\VirtualBox VMs\w10\w10.vbox'

[OK] VM registered.

[INFO] Creating virtual hard disk...

Path: C:\Users\brunobarbosa\VirtualBox VMs\w10\w10.vdi

Size: 128 GB

Format: VDI

Variant: Standard

0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Medium created. UUID: 1f438445-d016-483c-b923-35bb70c7414e

[OK] Virtual hard disk created.

[INFO] Creating SATA controller...

[INFO] Applying AHCI stability fixes for Windows installation...

[OK] AHCI queue depth limited to 16 (prevents overflow during install).

[INFO] Attaching disk to VM...

[OK] Disk attached successfully.

[INFO] Configuring disk as SSD...

[OK] Disk configured as SSD with TRIM support.

[INFO] Configuring boot order...

[OK] Boot order: DVD → Disk → None → None

[INFO] Starting VM configuration for 'w10'...

[INFO] Applying base configuration...

[OK] Base configuration applied.

[INFO] Configuring USB controller...

[OK] USB controller configured.

[INFO] Setting network adapter type...

[OK] Network adapter type set to Intel PRO/1000 MT Desktop

[INFO] Applying advanced network settings...

[OK] PCI Device IDs applied.

[OK] Advanced network settings applied.

[INFO] Configuring audio...

[OK] Audio configured (Controller: hda, Driver: was)

[INFO] Applying CPU configuration...

CPU Model: AMD Ryzen 7 1800X

[INFO] Attempting VirtualBox CPU profile: AMD Ryzen 7 1800X Eight-Core

[OK] CPU profile applied!

[INFO] Setting CPU vendor string...

[INFO] Setting CPUID leaf 1...

[INFO] Setting CPU brand string...

[INFO] Setting DMI processor info...

[OK] CPU configuration complete!

Vendor: AMD

Model: AMD Ryzen 7 1800X Eight-Core Processor

Socket: AM4

[INFO] Applying advanced CPU timing and features...

[OK] CPU configuration complete!

[INFO] Removing VirtualBox ACPI signatures...

[OK] ACPI signatures spoofed.

[INFO] Applying SMBIOS (DMI) spoofing...

[OK] DMI/SMBIOS motherboard info spoofed.

Board Serial: AC8EPYLIWW1W

System Serial: Q0ZIMCT93C

System UUID: 3a34e197-d1e0-4d21-b2b8-5a1c219a5fcb

[INFO] Applying storage device spoofing...

[OK] Hard disk spoofing applied.

[INFO] Applying optical drive spoofing...

[OK] Optical drive spoofing applied.

HDD: Samsung SSD 980 EVO

DVD: Slimtype DVD A DS8A8SH

[INFO] Applying RAM module spoofing...

Available RAM profiles:

1. Corsair Vengeance LPX 16GB

2. G.Skill Ripjaws V 32GB

3. Kingston Fury Beast 16GB

4. Samsung DDR4 32GB

Select a RAM profile (1-4): [1] (Realistic RAM module configuration)

1

[OK] Selected: Corsair Vengeance LPX 16GB

[OK] RAM Slot 0: Corsair CMK16GX4M2B3200C16 (8192 MB)

[OK] RAM Slot 1: Corsair CMK16GX4M2B3200C16 (8192 MB)

[OK] RAM module spoofing applied.

[INFO] Configuring time synchronization controls...

[OK] Time synchronization controls modified.

[INFO] Configuring console output and boot display...

[OK] Console and boot display configured.

==================== PORT CONNECTOR EMULATION ===================

Configure Port Connector Emulation? (Y/N) [Y] (Adds realistic port information to DMI)

y

[INFO] Configuring port connectors for realistic DMI data...

[OK] Port 0: USB 3.2 Gen 1 Type-A

[OK] Port 1: USB 3.2 Gen 1 Type-A

[OK] Port 2: USB 3.2 Gen 2 Type-C

[OK] Port 3: USB 2.0 Type-A

[OK] Port 4: USB 2.0 Type-A

[OK] Port 5: HD Audio Line Out

[OK] Port 6: HD Audio Mic In

[OK] Port 7: Ethernet RJ-45

[OK] Port 8: SATA 6Gb/s

[OK] Port 9: SATA 6Gb/s

[OK] Port 10: HDMI

[OK] Port 11: DisplayPort

[OK] Port Connector Emulation configured with 12 ports!

[INFO] These ports will appear in system information tools (dmidecode, etc.)

==================== MISC HARDWARE EMULATION ===================

Configure Misc Hardware Emulation? (Y/N) [Y] (Adds realistic keyboard, mouse, ACPI, AHCI, OHCI info)

y

========== KEYBOARD/MOUSE CONFIGURATION ==========

Available Keyboard Vendors:

1. Logitech

2. Microsoft

3. Dell

4. HP

5. Razer

Select Keyboard Vendor (1-5): [1] (Logitech is most common)

1

Available Logitech Keyboard Models:

1. K120

2. K270

3. K380

4. G Pro

5. G915

Select Keyboard Model (1-5): [1] (Select your preferred model)

1

[OK] Keyboard: Logitech K120

Available Mouse Vendors:

1. Logitech

2. Microsoft

3. Dell

4. HP

5. Razer

Select Mouse Vendor (1-5): [1] (Logitech is most common)

1

Available Logitech Mouse Models:

1. M185

2. M510

3. G502 HERO

4. G Pro X

5. MX Master 3

Select Mouse Model (1-5): [1] (Select your preferred model)

1

[OK] Mouse: Logitech M185

[OK] Keyboard/Mouse emulation configured.

========== POWER CONFIGURATION ==========

Platform Type:

1. Desktop (No battery - Standard configuration)

2. Laptop (Note: VirtualBox cannot emulate battery hardware)

Select Platform (1-2): [1] (Desktop is standard)

1

[OK] Platform: Desktop (AC Power Only)

========== ACPI CONTROLLER CONFIGURATION ==========

Available ACPI Vendors:

1. Intel

2. AMD

3. ASUSTeK

4. MSI

5. Gigabyte

Select ACPI Vendor (1-5): [2] (Match your CPU vendor for consistency)

2

Available AMD ACPI Models:

1. FCH

2. Promontory

3. X570

4. B550

5. B650

Select ACPI Model (1-5): [1] (Select chipset generation)

1

[OK] ACPI: AMD FCH

========== AHCI CONTROLLER CONFIGURATION ==========

Available AHCI Vendors:

1. Intel

2. AMD

3. ASMedia

Select AHCI Vendor (1-3): [2] (Match your CPU vendor)

2

Available AMD AHCI Models:

1. FCH SATA Controller [AHCI mode]

2. 400 Series Chipset SATA Controller

3. 500 Series Chipset SATA Controller

4. 600 Series Chipset SATA Controller

Select AHCI Model (1-4): [1] (Select chipset SATA controller)

1

[OK] AHCI: AMD FCH SATA Controller [AHCI mode]

========== OHCI CONTROLLER CONFIGURATION ==========

Available OHCI Vendors:

1. Intel

2. AMD

3. VIA

4. NEC

Select OHCI Vendor (1-4): [2] (Match your CPU vendor)

2

Available AMD OHCI Models:

1. FCH USB OHCI Controller

2. SB7x0/SB8x0 USB OHCI Controller

Select OHCI Model (1-2): [1] (Select USB controller)

1

[OK] OHCI: AMD FCH USB OHCI Controller

[OK] EHCI/XHCI also configured to match.

========== MISC HARDWARE SUMMARY ==========

Keyboard: Logitech K120

Mouse: Logitech M185

Platform: Desktop (no battery)

ACPI: AMD FCH

AHCI: AMD FCH SATA Controller [AHCI mode]

OHCI: AMD FCH USB OHCI Controller

============================================

[OK] Misc Hardware Emulation configured!

[INFO] Applying extra anti-detection flags...

[OK] Additional anti-detection fixes applied.

[OK] Extra flags applied.

[INFO] Configuring unattended installation...

[INFO] Using temporary password 'ChangeMe123!'

[DEBUG] Command: VBoxManage unattended install w10 --iso=C:\Users\brunobarbosa\Downloads\Windows.iso --user=14wag --full-user-name=14wag --hostname=wag.local --time-zone=UTC --locale=en_US --country=US --password=ChangeMe123!

[OK] Unattended installation configured!

[INFO] VirtualBox will automatically:

- Attach the Windows ISO

- Generate autounattend.xml

- Boot and install Windows

[INFO] Verifying configuration...

[OK] All critical settings verified.

Create a snapshot of this VM configuration? (Y/N) [Y] (Recommended to preserve this state)

y

Enter snapshot name: [CloakBox-Configured-2026-06-03] (Descriptive name for this snapshot)

oldd

[INFO] Creating snapshot 'oldd'...

0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Snapshot taken. UUID: 9209d462-8ae8-4bf9-8053-7968cef82028

[OK] Snapshot created successfully.

==================== PS/2 MOUSE FIX ===================

[INFO] Applying PS/2 Mouse fix for detection evasion...

Checking for running VirtualBox processes...
Stopping VBoxSVC.exe process...
VBoxSVC.exe terminated.
Stopping other VirtualBox-related processes...
Stopping VBoxSDS...
All VirtualBox processes have been terminated.

[OK] Found: C:\Users\brunobarbosa\VirtualBox VMs\w10\w10.vbox

[INFO] Inserting missing HID tag...

[OK] Mouse fix applied successfully!

True

Export configuration summary to file? (Y/N) [Y] (Save settings for reference)

y

[OK] Configuration saved to: C:\Users\brunobarbosa\Desktop\CloakBox-w10-Config-2026-06-03-1756.txt

==================== START VM ===================

Start the VM now? (Y/N) [Y] (Begin installation)

y

[INFO] Starting VM with GUI...

Waiting for VM "w10" to power on...
VBoxManage.exe: error: /TM/TSCTiedToExecution is not supported in NEM mode! (VERR_INVALID_PARAMETER)
VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component ConsoleWrap, interface IConsole

[ERROR] Failed to start VM (Exit code: 1).

 # ================== IMPORTANT NEXT STEP ==================

VERIFY ANTI-DETECTION: Use tools like Pafish or Al-Khaser or my Powershell to test VM detection.

   # ==========================================================

Start the VM now? (Y/N) [N] (Launch VM after configuration)

[brunodelucasbarbosa]

edit: opening by virtual box app receive error: