Reported here: https://groups.google.com/g/miniscope/c/ocR43C_1v2Y/m/rigo-1CIAgAJ
We have built a first batch of five MiniLFOV. All functions when tested individually on our device do work. However, we have been encountering issues with the LED and gyroscope functionality
We used the published Gerber, BOM and the currently uploaded videodevice.json file during the testing. But only the imaging and focus worked.
Apparently the videoDevices.json file doesn't work and requires modifications to use the LEDs and gyro.
Will follow up and ask for the modified videoDevices.json file.
Again tests are necessary here so we can accept pull requests and modifications from collaborators and users - we will need to manually inspect the changes to the config file and manually test if it works before pulling to this repo, but if we had a test suite we could just check if the tests pass and merge with minimal overhead.
Related to: #6
Reported here: https://groups.google.com/g/miniscope/c/ocR43C_1v2Y/m/rigo-1CIAgAJ
Apparently the
videoDevices.jsonfile doesn't work and requires modifications to use the LEDs and gyro.Will follow up and ask for the modified
videoDevices.jsonfile.Again tests are necessary here so we can accept pull requests and modifications from collaborators and users - we will need to manually inspect the changes to the config file and manually test if it works before pulling to this repo, but if we had a test suite we could just check if the tests pass and merge with minimal overhead.
Related to: #6